Jump to content
SAU Community

Recommended Posts

Hi all!

I'm urgently chasing an R33 or R34 RB25 Turbo... doesn't matter if it doesn't have an actuator, but it needs to have the outlet elbow..... also good condition (i.e. little to no shaft play)

Also chasing an R34 GTT Intercooler (Standard Sidemount) with the air guide for the front of it...

I'm after these parts pretty urgently, as i need to get my car back on the road, so if you have these, or know of someone with these parts for sale, please, let me know :P

Thanks,

Jason

Link to comment
https://www.sau.com.au/forums/topic/96173-wtb-urgent/
Share on other sites

bumpity bump... This is getting fairly urgent now..

Lazy Bastard, i've sent you a PM...

i have stock 33 rb25 turbo and 33 side mount intercooler if u are still looking

Edited by 33gtn
Link to comment
https://www.sau.com.au/forums/topic/96173-wtb-urgent/#findComment-1754070
Share on other sites

Hrm, does anyone still have an RB25 turbo for sale? seems the one i got is either a dud (highly unlikely, as i checked it out myself, as well as got others to check it out... even the workshop said it looked fine when i took it to them), or the workshop f**ked it and aren't prepared to admit it...

SO FRUSTRATING!!! :D:D:angry::ph34r:

Link to comment
https://www.sau.com.au/forums/topic/96173-wtb-urgent/#findComment-1782603
Share on other sites



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...