Jump to content
SAU Community

Recommended Posts

yes

what you need is

BNR34 Getrag 6MT gear box (Nissan list price is aorund 458000YEN)

Nismo propeller shaft (part no: 37300-rr595) 95000yen

Clutch for BNR34

Set of Final gear (or you can use BNR32's 4.111)

will cost u about 10k fitted?

yes

what you need is

BNR34 Getrag 6MT gear box (Nissan list price is aorund 458000YEN)

Nismo propeller shaft (part no: 37300-rr595) 95000yen

Clutch for BNR34

Set of Final gear (or you can use BNR32's 4.111)

will cost u about 10k fitted?

Champion !!!!!!

I will start saving, that is something i would really like to do,

appreciate your help mate.

steve

One needs to ask the question why you want to do this...

R33 and R34 gear ratios are :

1st : 3.214 / 3.827

2nd : 1.925 / 2.360

3rd : 1.302 / 1.685

4th : 1 / 1.312

5th : 0.752 / 1

6th : N/A / 0.793

You are basically going to have a very tall 1st gear (might be pretty useless if you don't change diff ratios) and squeeze another ratio in between 2nd and 3rd. Your 4th and 5th is pretty much equal to getrag's 5th and 6th.

Is that really worth the estimated $10k...? (I'm thinking would even cost more than that)

There are a lot of power mods you can do with those $$$.

PS: You don't need the R32 final gear as yours is identical (4.11).

R34 final gear is 3.54 and if you decide to change the rear diff ratio, the front one has to be changed as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...