Jump to content
SAU Community

Recommended Posts

I use 32psi all round, and it feels tight, but not with too much road noise. I guess you should check what is written on your tyre?

I'm not sure about the 40psi mark... sounds like over-inflating when you're talking about stock tyre dimensions?

Link to comment
https://www.sau.com.au/forums/topic/96846-tyre-pressure/#findComment-1758858
Share on other sites

Car manufacturers give recommended tyre pressures that are best for the smoothest ride, not the best handling.

If you like a nice smooth ride, put them to 32psi.

If you want the best handling put it up high like Duncan said around 38-42psi. I always have my tyres at about 38psi.

Link to comment
https://www.sau.com.au/forums/topic/96846-tyre-pressure/#findComment-1760656
Share on other sites

There are 2 main things that happens with higher tyre pressures:

1/ Much firmer tyres, basically the same as fitting firmer shocks.

2/ Less tyre wall flex which is more important on high sidewalls like stock ones. Less difference with big rims/low profile tyres.

I took my old gtst (king springs, 10psi boost, otherwise stock, and with a passenger) around Eastern Creek in 1.57 on road tyres (Falken fk451) at 42psi

Of course it is all totally different with race or r tyres, they have very strong sidewalls and tend to be designed for 30-35 psi hot.

Like shyster said, manufacturers want comfort, not performance :)

Link to comment
https://www.sau.com.au/forums/topic/96846-tyre-pressure/#findComment-1762371
Share on other sites

  • 2 weeks later...

Yeah, I've noticed the same thing. I usually run about 33-34psi in mine (stocko rims/tyres) and I've found that the ride's really good, but the handling sucks; it rolls on the rims. But at higher pressure the corners aren't so hairy, so yeah I'd be going up around 38psi for handling... but for everyday use, the 32psi would do you just fine.

Car manufacturers give recommended tyre pressures that are best for the smoothest ride, not the best handling.

If you like a nice smooth ride, put them to 32psi.

If you want the best handling put it up high like Duncan said around 38-42psi. I always have my tyres at about 38psi.

Link to comment
https://www.sau.com.au/forums/topic/96846-tyre-pressure/#findComment-1816903
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...