Jump to content
SAU Community

Recommended Posts

what i would like to know is the specs on this turbo

and how it would perform on a rb20 if possible as they told me the r33 and 32 hiflows differ

or even when it hits full boost..??

called GCG and supposedly they didnt know specs!?!?

thanks

We had a GCG ball bearing high flow on an RB20DET (170,000 ks' old), made 225 rwkw at 1.3 bar with 1 bar at 3,000 rpm, no boost drop off till 7,500 rpm, made good power to 8,250 rpm. Highly recommended.

:P cheers :)

yes but the RB20 and RB25 compressor housings are going to perform differently.

so if you use an RB20 turbo instead of an rb25 to start with you will have boost earlier but peak earlier...

Edited by CEF11E
yes but the RB20 and RB25  compressor housings are going to perform differently.

so if you use an RB20 turbo instead of an rb25 to start with you will have boost earlier but peak earlier...

Correct, but the difference is not dramatic, I don't think it would be more than 250 rpm later to 1 bar with the R33/RB25 turbo. The R34/VG30 turbine covers wouldn't be my choice, another 500 rpm or so I reckon.

:D cheers :D

We had a GCG ball bearing high flow on an RB20DET (170,000 ks' old), made 225 rwkw at 1.3 bar with 1 bar at 3,000 rpm, no boost drop off till 7,500 rpm, made good power to 8,250 rpm. Highly recommended.

what were the other support mods?

well, ill let you know how i go early january when i finish my tune

mods:-

- full 3" exhaust

- walbro fuel pump

- gtr injectors

- Z32 AFM

- remapped ECU

- FMIC

- bleed valve

- K&N pod

and adding the gcg stage 1 high flow within the next 2 weeks

what were the other support mods?

Let me think;

POD, heat shield, substantial air feed

Performance metalcraft split dump

3.25" Nismo exhaust

No cat

OS Giken twin plate with flywheel

No HICAS

No aircon

Electric fan

Power FC with BCK

Castrol 10W60 oil

Oil cooler

Optimax

NGK copper plugs

One full day tuning on the dyno (plenty of time spent around the boost build rpm)

All on a 170,000 k's old RB20DET, that showed OK leak down figures for its age

:( cheers :P

i only made 254 hp at the wheels with stage 2 r33 hiflow turbo. This was on an auto r32 mods:

pod

3inch exhaust no cat

FMIC

z32 AFM

gtr injector 040 fuel pump

Have had the standard computer chiped (Romed)

Oh and mine is very laggy

i almost made that power with just an rb25 turbo..

get your car looked at i think

I agree.. i have an auto r32 with rb25 highflow (not gcg however) and checked today the revs vs boost, and its making 12psi (tubotech controller) by 3800rpm.. without any proper tune. No idea of power at the moment.

Tune coming tuesday for some figures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...