Jump to content
SAU Community

Recommended Posts

this is a good read

got a gcg hi-flow rb25 turbo going on my r32 now

other mods include 550cc injectors and powerfc and the usual kinda shit

i'll watch this thread and post results when/if i get them

our cars sound similar apart from PFC, would be good to see the differance

  • 2 weeks later...

man my engine must be buggered or sumthin...i have a high flowed turbo (not a GCG) but loooks exactly like it, and im only making 245rwhp and thats with tomei cams and 14psi and power fc....anybody know wat could be my prob?can i have a buggered head gasket? or could it be the rings?

wind it up the boost to 18psi or so.. it's probably the only way you'll get power out of it.. then it will be laggy and possibly kill an old engine. Sounds similar situation to my highflow rb25 (its running 16psi at the moment).. not the best match for rb20.

man my engine must be buggered or sumthin...i have a high flowed turbo (not a GCG) but loooks exactly like it, and im only making 245rwhp and thats with tomei cams and 14psi and power fc....anybody know wat could be my prob?can i have a buggered head gasket? or could it be the rings?

i wish i had that, ive got 253hp@22psi. RB20 hybrid, exhaust housing too small. new turbo here i come.........

sounds similar to mine..

nf: I think you'll make maybe 20% more power with raising the boost another 4psi or so... so thats quite a good result if you ask me.

may as well post up my chart as a point of comparison.

16psi on highflow rb25 turbo (rb20 actuator), k&n panel filter, 3" exhaust right thru, highflow cat, hybrid cheap front mount 450x300x75, turbotech boost valve, SAFC.. So seeing as mine is AUTO, and non-powerfc seems about in range with nF above by taking 20-30% off.

I don't think there was any temperature correction put in for the 32 degree day.. non-shootout .. So allowing 10-15%.. mine is about 150rwkw on any other dyno (probably feels about 150rwkw too).

A fair bit of blowby at 16psi exhibited in my engine, whereas was none at 12psi... so any more isn't a good idea in mine at the moment.

post-1332-1134802264.jpg

sorry don't have a scanner or camera here so i'll try describe

also graph doesn't have RPMs so someone might have to convert

in 3rd gear, peak power at 114km/h, made full boost by 82km

graph is a nice curve too :(

mods that are important:

- split dump

- splitfires

- iridium plugs

- k&n pod

- 3 inch full exhaust with a hi-flow cat (crowbar brand)

- the turbo is r33 gcg hiflow with i think the r32 actuator

- 550x100x76 intercooler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...