Jump to content
SAU Community

Recommended Posts

Guest turbine

Hello all, this is my first post and i have been reading some the threads over the last couple of days. I must say i am thoroughly confused with all the different model and engine numbers that these cars have.

I am still in the dark ages at the moment as far as vehicle choice. I have a 98 xr8 sedan with the acient (spelling)windsor 5litre. I am looking at purchasing a new car in about april may and have been checking out the xr6t ba falcon,as i like abit of comfort and room.

I already know about the possible driveline probs this car might have if a few mods were made to increase boost.I was wondering what my 50g's would get me in a import.

This is just an inquiry at the moment so i'm not ready to sign on the dotted line just yet.

xr6t with a couple of options 50,000 on the road

xr8 * * * * * * * * * * * * 56,000 on the road

Drove both (manual) and seat of the pants say's the turbo's quicker. (imo):uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/9744-what-will-50k-get-me/
Share on other sites

Finding a R32 in good condition will be hard. I spent a year doing so. Now probably will be harder. My car's starting to show leaks but that's cause I thrash it on the track.

R33 gtr is the best bet. Get a V spec if you can live with the harshness. In you can't, just get a regular R33 gtr.

R34 lacks torque that GTR's produce stock.

I would buy an R33 GTR

94 ~ 97(or 98) model

2.6 litre inline 6 cylinder twin turbo.

4WD with ATESSA-ETS

Some info from www.fullboost.com.au

Body 2 door coupe cd 0.35

Drive Longitude front engine, four-wheel drive, 5spd manual

Engine RB26DETT 2568cc, in-line 6, dohc, 24V, efi, twin Garrett turbochargers, intercooled, bore x stroke: 86x73.7, 8.5:1, 9psi

Power/Torque 206kW@6800rpm, 367Nm@4400rpm, 7500 redline

How heavy? 1530kg

Suspension Double wishbone front and rear

Length/Width/Hieght/wheelbase 4645/1780/1360/2720

Brakes 325mm Ventilated and cross-drilled discs with 4-piston calipers and 2-piston rears, ABS

Wheels/Tyres 17 x 9 inch alloys with 245/45R tyres

Performance (0-100kph/0-400m) 5.8 secs/13.8secs

turbor3301.jpgturbor3302.jpg

Guest turbine

Thanks for the replies guys. R33 gtr seems to be a favorite by the sounds of most comments. What is the resale on these vehicles like say with 100,000kms travelled?

Is it better to purchase a car with no mods done and also seeing as the other half has to drive it as well,are the auto's substanially slower? ( i know can't be helped unfortunatly) Parts and servicing, is it alot more expensive than the average performance car?

thanks again.

I'm starting to think there are too many R33 GTR's around or cars that are trying to look like an R33 GTR (i can talk :lol:) and most people who aren't into skylines can't tell for crap (or care) whether it really is a GTR.

I'm even thinking an R34 GT-T is a better option to an R33 GT-R due to them being newer, more original looking, decent power, for same price. Just my personal opinion though!

Oil, filter, plugs things like that aren't going to be too much differnt to what you're going to have to sink into a new XR6. I think with a performance car/car you care about you maybe get better things rather than the cheapest crap you can find. Generally that gives you longer life out of things.

Originally posted by turbine

and also seeing as the other half has to drive it as well,are the auto's substanially slower? ( i know can't be helped unfortunatly)

Autos? Nah, sorry. GTRs are a drivers car foremost, and like any good drivers car, it only comes in manual.

Hey Turbine,

Yea its better to get a stock gtr in my opinion.A stock one is fast enough already,and maybe modified one gets alot of "use and abuse".I think the resale value is pretty good, its a gtr afterall.Anyway, i think an r33 gtr is one of the best value for money performance car out there.Servicing will costs much like any other import.Test drive one,youll thank me later

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...