Jump to content
SAU Community

Recommended Posts

Hey Guys,

I'm pretty sure that for my next mod I want to replace my SMIC rather than go the full FM.

I've seen a company called ARC that make an aftermarket SMIC which is apparently 30% bigger than stock. Are there any other manufacturers out there that have a similar product?

Pretty my I just wanna fit the largest SMIC in using the existing piping

Link to comment
https://www.sau.com.au/forums/topic/97504-smic-for-r33/
Share on other sites

is it a case of the stock SMIC is not good enough or the stock position is not good enough. Is there enough airflow to the core with 200rwkw, as around that level on stock rb25 is a higher level of stock boost, which i would presume heat up the intake charge, so you would want the SMIC doing the best it can, just wondering if its able to do so in the stock position

Link to comment
https://www.sau.com.au/forums/topic/97504-smic-for-r33/#findComment-1771303
Share on other sites

paul, the advantage of the SMIC is that you have unimpeded airflow thru to the wheelarch and no hot radiator sitting behind it. a relatively short pipe run back helps response (which i reckon i can feel now i have an FMIC)

the disadvantage is the surface area to volume ratio isn't as favourable (vs FMIC) for heat exchange in the space. the trust unit has plenty of scope to go > 200rwkw.

given the cost of installing a FMIC vs SMIC they are a viable option for folks looking for good streetable power.

Link to comment
https://www.sau.com.au/forums/topic/97504-smic-for-r33/#findComment-1771987
Share on other sites

Paul r33. The problem with the stock smic is not the positino. It's fine. It's nicely ducted. There are two problems with it:

1. it's restrictive. That is, the cross sectional area is small, so it doesn't flow very well at high boost. That's why it's common to have a 2 psi drop at 12 psi. at stockish boost (like 8psi, it's not noticeable).

2. It doesn't cool very well. This is becaause it's so small. Need I say more?

A larger smic, is both thicker, taller and maybe even wider. I have an r34 smic. It's 20 mm thicker and I think about 1 inch taller (from memory, so someone correct me if i'm wrong).

It has been worked out that the cross sectional area is 60% better, so it should be less restrictive. Furthermore, the extra thickness and height means it has more cooling surgace

Link to comment
https://www.sau.com.au/forums/topic/97504-smic-for-r33/#findComment-1772515
Share on other sites

Thanks Guys. Gonna go sound mount then. I still have the stock airbox aswell and thinking about replacing it with a pod. Would that just be a waste of time considering I won't have the CAI that I would get if I was running a FMIC ? Would the POD/SMIC combination be a crappy combo?

Link to comment
https://www.sau.com.au/forums/topic/97504-smic-for-r33/#findComment-1777230
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...