Jump to content
SAU Community

Recommended Posts

I’m selling the following parts for a friend who was doing up a skyline but has run into finical problems and needs to sell the following:

(These parts are no more then 500km old)

Trust intercooler + pipes $1500 (GTST)

Trust White face boost gauge $200

Nismo 555cc injectors (side feed x 6)

Bosch fuel pump

The car is also for sale

Black ’96 Gts-T,

New Advan 3L engine (with trust pistons, less then 1000km and all paper work)

Lowered king springs

Trust exhaust

Trust pod filter

Red racing seats

Full body kit

This car is in a one condition

$23000

For more details you can email me [email protected]

Link to comment
https://www.sau.com.au/forums/topic/9756-skyline-parts-looking-for-new-home/
Share on other sites

Guys I don't wont to be rude but PLEASE read the above info before emailing me and asking what size the injectors are.

Zila33: yes sorry man they are side feed injectors, and there are 6 of them

Pawley: Yes $150, but for you $160 :P

Nismo99: Side feed injectors, and there are 6 of them. $350 but for you $360 :D

Thats a huge bargain on the injectors. Six for the price of one.

Da-man any ideas on what seats are in this car? are the Recaros or generic sport seats?

Cheers

Nick

Da Man, mechanical or electronic boost gauge? It is electric if it just says 'turbo' on the face, but if it says 'trust super tuning systems...' on the face it is mechanical. Let me know.

Guys the gauge is LIKE this temp on (but it is boost). with inregards to the cooler exact dimensions i'm not sure but its may bigger then the standard one, and usually requires some modifing of your front bar, I will get exact dimensions durring the weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...