Jump to content
SAU Community

Recommended Posts

Hey guys and girls, i have just bought a car and need some help on mods and compliance. The car is a 1989 Nissan Skyline R32 GTS-t 4door.

These are of the car right now in Japan

7624.jpg

This is a quick chop i what i would like it to look like

4dr3ba.jpg

the mods done in the chop are

Removed Rear Spoiler: whats involved in doing this, cost?

Rims: looking at 5 spoke around 17inch, which are either white or can be painted white. whats involved in painting rims? is it something is shud do or shud i get pro, powder-coat etc etc???

Suspension: i would be looking to lower the car 40mm at the front and 50mm at the rear(going by pictures, will have better look when the car gets here), whats a good cheap option? looking for increased handling aswell as look.

Bonnet trim: i have looked at cutting the little lip on the bonnet that hangs down between the lights. it would then be filled with black mesh. method??

as for Compliance: is it worth doin it myself, whats the cost difference on average? thanks.

Link to comment
https://www.sau.com.au/forums/topic/98719-just-bought-an-r32/
Share on other sites

This will give you a few ideas about Compliancing.

http://www.skylinesaustralia.com/forums/in...showtopic=41327

The beat way to go about rims is to buy white ones or get second hand rims (cause they are cheaper) and get them coated in white enamel, as it sets hard, but I am not too sure about coating Alloy but just ask your local paint shop they should be able to help.

cheers

Chris

yeh thanks, i think i might be covered on the compliance, i have got a quote for around 700 with RWC at a shop. sorry but some of the Qs have already been covered in the NS.com thread.

yeh do u know what size stockies are, 16's?? might get them powdered, or just find some real cheap 17 5spoke alloys and powder them.

I've seen some GTS-T bonnets cut to accommodate a GTR grill, and they've all looked pretty dodgy. If you're keen on the idea, cut the whole inner section out, and weld in a new plate, so it all looks neat. :)

Adrian.

Removed Rear Spoiler: whats involved in doing this, cost?

Depends on how neat you'd want it to look. Very low cost if you just plug up the holes with some silver watertight plastics plug and up to $300 to get the holes welded up and boot resprayed.

Rims: looking at 5 spoke around 17inch, which are either white or can be painted white. whats involved in painting rims? is it something is shud do or shud i get pro, powder-coat etc etc???

I suggest you get them white to start of with and failing that, get a pro to do it. Be warned white multispoke rims require alot of dedication to keep clean.

Suspension: i would be looking to lower the car 40mm at the front and 50mm at the rear(going by pictures, will have better look when the car gets here), whats a good cheap option? looking for increased handling aswell as look.

Get some springs that'll lower the car.

Bonnet trim: i have looked at cutting the little lip on the bonnet that hangs down between the lights. it would then be filled with black mesh. method??

I think you'd be better off getting a GTR bonnet.

Edited by Wink

with the bonnet, i recently done just what you want. cut the lip off with an angel grinder, covered the exposed metal so it wouldnt rust, and cover with a gtr lip piece.

at the jap wreckers here it was $350 for a gtr bonnet which had a dint and huge scratched dint in it.

my $100 gts bonnet in perfect condition with lip grind off works just as well.

pic can be found here

http://members.optusnet.com.au/damage/boos...ll_Sv402956.jpg

with the bonnet, i recently done just what you want. cut the lip off with an angel grinder, covered the exposed metal so it wouldnt rust, and cover with a gtr lip piece.

at the jap wreckers here it was $350 for a gtr bonnet which had a dint and huge scratched dint in it.

my $100 gts bonnet in perfect condition with lip grind off works just as well.

pic can be found here

http://members.optusnet.com.au/damage/boos...ll_Sv402956.jpg

That actually looks pretty good. Can't even tell its a GTSt bonnet

yeh just another quick Q, i was looking at a list of mods recomended by Dr Drift(from ns.com maybe on here aswell) and he rekons to go exhaust and fuel pump (bosch 040) first, and then intercooler after those 2.

just wondering about the fuel pump, he recomended about 400 dollars new, i have seen a few used for round 200, i beleive these pumps also need mounts. and my question is if these pumps dont come with mounts or anything but the pump, what other costs are involved, mounts etc? and will i need to get it put in or can it be done by someone of average maechanical skill.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...