Jump to content
SAU Community

Recommended Posts

Purchased a pair of R34 eyelids from MFX about a month and a half ago; finally got them painted and fitted today :D Decided to go DIY as the initial cost of the item didn't warrant a professional spray job. Besides, the item is so damn small it's going to be near impossible to funk it up~

Ingredients:

2 x MFX R34 Eyelids

1 x Can of Automotive Spray Paint (Nismo White)

1 x Can of Laquer

1 x Brick (to hold eyelids up above ground)

1 x Old Newspaper (to keep my driveway spotless)

Process took 2 days as I only began work Saturday evening. Applied 2 initial coats of white and left to dry overnight. Came back from a small meet-up today and finished it off by applying a final coat of paint followed by 2 coats of laquer.

Voila....

Eyelids fitted using double sided adhesive tape; had to be cut to size. Because these eyelids "flex" to a certain degree, fitment was clean and easy as you could bend them to the shape of the headlight :)

Photograph'os:

post-19974-1134893925.jpgpost-19974-1134893956.jpgpost-19974-1134893980.jpgpost-19974-1134894005.jpgpost-19974-1134894031.jpgpost-19974-1134894090.jpgpost-19974-1134894118.jpg[attachmen

=15363:attachment]

Still not sure whether I'll keep em on for good... a little undecided atm! Maybe they'll grow on me so they'll stay on for a month or two :) Good thing is that the adhesive is only on the plastic housing of the headlight which means removal is a piece of cake!

post-19974-1134894057.jpg

post-19974-1134894145.jpg

Link to comment
https://www.sau.com.au/forums/topic/98855-installed-r34-eyelids/
Share on other sites

I think you are 100% correct.... the East Bear ones look much more aggressive! But could that be because of the front bar it is partnered with? Could be a "package" feel rather than the single piece feel...

Anyways, thanks for the feedback guys :)

IMO, look's more aggressive yes.. but still needs more covering the light on the other hand - if you got the r34 GTR style grill it looks a whole lot better! I recon even without the lids.. just looks badass

Edited by ignuz

ignuz; I agree that the GTR grille would look awesome no doubt, but the amount of work + money to get that look is not justified in my books. There are just too many parts that need to be replace in order to achieve that look - and only so that the eyelids look more agressive, proves my point even more :D

oh :D Pictures don't mean anything anyway... always looks different in person :D

oh and also.. i can't tell if you've already done it or if it even can be done.. but if you take the lids off and just tint the glass a bit.. make it darker i think that would look alot more aggressive even without the lids.. that white on black look :D

Edited by ignuz
  • 4 weeks later...
  • 1 month later...

stan... those eye lids are alrite... the "Angry" C-West ones are ghey... I got a set and had em on the car for 3 days and couldnt hack it. Stock is the best... R34 headlights give the R34 that uniqe beefy look so why cover them up??

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...