Jump to content
SAU Community

Recommended Posts

Gester, I had Dunlop FM901's on my last car and found them really predictable and stable when sliding in the dry. They weren't that great in the wet though, but still remained predictable. For the performance, the cost was quite reasonable. However they are quite soft; almost an intermediate compound so will wear quite quickly. Oh, and they were MOTOR's top tyre last year.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-153969
Share on other sites

I love my Falken Ziex tyres. Dunno what they cost on there own as I got 'em with a tyre & wheel package from Tempe Tyres Sydney.

GoodYear Eagle F1s are pretty awesome but if you have wide wheels you can't get 'em. The F1s are great in the dry but they are awesome in the wet!

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154252
Share on other sites

Simex for the rear baby yeah!

I do mid 13's all day on just 205's .

however I don't reccomend anything this small, they are still 205's after all, they are just really good for such little tyres.

BTW, don't put them on the front as the sidewalls are spongy and give a little too much radial roll. For the back thats ok, offsets the stupid hicas a little. For the front something that will point the car positively is the go.

Simex are fine wet or dry BTW.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154481
Share on other sites

From memory there was an article in Motor or Wheels magazine in a recent edition. It was either 1 or 2 months ago.

Anyway, I think the top rated performance tyre based on wet and dry driving was the Pirelli, followed by the Bridgestone and Goodyear. A respectable 6th out of about 16 tyres was the Hankook. It came it at around half the price of the top brand and were behind the Yokohama and Dunlop.

All the tyres were 235/45/17.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154650
Share on other sites

Best tyres will depend on many factors, such as budget, driving conditions etc. I like the Toyo TPG's, they are by far the best tyre I've ever used. Type R tyres are great for racing, but useless in the wet and don't last long.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154685
Share on other sites

The Toyo's came out somewhere in the bottom 4 I think and Simex was either last or second last.

I was thinking of getting the Hankooks Venturis as I had them quoted for $199 each (the article quoted $175). They are a better wet weather tyre as a pose to dry, but the main selling point was the quality for an affordable price.

Also, in addition to having very good grip, the tread life is about twice that of the Bridgestone G Grid (approx 17000km). I was planning to get these originally.

Falken was a notable omission from the tests. I don't know why.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154913
Share on other sites

Kichigai,

Your only talking about the cheap brands, the TPG's are expensive and are much better. Simex are crap, but of the cheap lot then they are OK.

It really depands on what the budget is. Most tyre manufacturers make a range of tyres, from crap to good, so you can't compare them. $175 is a cheap tyre, I generally spend $300+ each, on new tyres .

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154919
Share on other sites

Paul,

The article compared all major tyre manufacturers. As I mentioned earlier, the Hankooks came to about half the price of the name branded tyres e.g. Bridgestones $364 each, Pirelli ard $400 from memory.

I agree with what you're saying, its just that the article was basically a "Bang for your bucks" style comparison. It tested wet & dry handling, braking and value for money. So for ppl that are wanting the performance factor but want to save a little money the article is relevant.

Hope that helps.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154937
Share on other sites

Kichigai,

I haven't read the article so I can't really comment on that, but from my own experience, I would never choose the cheap manufacturers like Hankook or Nangkang. Bang for your buck maybe, but for a performance vehicle they just don't stack up. I've tried about 5 different brands of tyres and the Toyo TPG's are the best I've tried, both in the wet and dry.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-154945
Share on other sites

A little off topic, but I did the ring around today for a pair of tyres. I'll be getting the 901's again (fronts this time).

And the bloke said that the FM901's are being replaced by a LM382 (or something like that). The strange thing is this bloke quoted me $278 for a 901 and $237 for a LM382. I wonder if this means the LM382 are going to be a crappier tyre???

After a few phone calls I found the 901's at $220 each - much better :)

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-155317
Share on other sites

  • 2 months later...

Im using continental contact conti sports on the front and change betwee jokies dna gp and brigestone re540s on the back. never had any problem with any of these tyres. I prefer to have a softer tyre on the front than on the back. Just my 2c

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-287357
Share on other sites

  • 1 month later...
Originally posted by Jay95R33

The 239 is a good price no-a-days.

I say grab'm  :O

Last week i got some new quotes for these Dunlop FM901's.

From a Dunlop dealer they were $200ea + fitting.

From Beaurepairs they were $269ea fitted.

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-371437
Share on other sites

ahhh im going crazy with all these choices. Ask 10 people and get 5 different answers, ask another 10 people and get another 5 different answers.

So far to date i have quotes on:

(225/50/16)

Bridgestone G3 = $220ea

Bridgeston ER50 = $270ea

Dunlop FM901 = $269ea

Link to comment
https://www.sau.com.au/forums/topic/9907-best-tyres-to-get/#findComment-373200
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL.... a good amount of people (not all) on that continent seem to know everything and like to measure things in bananas, football fields, statue of liberties instead of the metric system lol.
    • I assume the modules are similar enough, so if you've had no issues I don't see why I would. I have tried to find a wiring diagram for the FPCM / fuel pump circuit, but I can't find it anywhere. Otherwise, I would just do some wire cutting and joining at the FPCM and give the 12 V supplied to the FPCM directly to the pump instead. If you know anyone that could help with wiring diagrams, I'd be very happy  
    • If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
×
×
  • Create New...