Jump to content
SAU Community

Recommended Posts

Which wiper blades have people successfully replaced theirs with in an R33?

Mine are getting very sticky and crap and I think it's time to replace them, but funnily enough can't seem to find a specific blade for the R33.

Jason.

Link to comment
https://www.sau.com.au/forums/topic/99162-wiper-replacement/
Share on other sites

I got some from supacheap, they were like universal fit had fins for 3mm and 6mm or something like that, was a whil ago. But they work excellent. They were called "Big Grey", got them because my paint is GMG, there are black or there are a few different coloured ones. Cheap too.

Yeah I've seen those "Big Grey" ones too. Big W sell them also, they even sell them in a set of 3 so you can replace your front ones as well as your rear one. I got me some blue ones! Looks pretty shmick, but they are more expensive than the regular black ones. I think most of them are all a universal fit aren't they?

"Me fail english? That's unpossible!"

Edited by MacGuyver

The only comment on wiper blade that matters is Buy steel backed ones!! why? coz they actually keep working to a r.w.c standard longer than 1 weekend. Plastic ones can't apply the same pressure between blade and screen and after a short period are no longer effective, making them defective!!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...