Jump to content
SAU Community

Recommended Posts

how r ya guys! just had the 32 dyno'd 2day. it only has an exhaust, injectors(the comp has been played with 2) and r32gtr ball bearing turbos i think. i thought it was running fairly stock but it surprised me pulling 204.3 four wheel kw's. at 12psi. it was a shock 2 me. but im stoked!! i was expecting 180-190 four wheel kw's

i know alot of u guys got cars that has heaps more power! im happy

Link to comment
https://www.sau.com.au/forums/topic/99244-had-my-32-gtr-dynod/
Share on other sites

i went to Turbo Tune on south road, they have a 4wd dyno set up. umm, i think the cost was round $60-$70 for a power run and print out of it, i had a service as well that day.

i rekon they got up to a 50/50 split, the tourqe guage goes up there, but im not 100% sure! i thought they had the same attessa-ets system as the gts-4

i rekon they got up to a 50/50 split, the tourqe guage goes up there, but im not 100% sure! i thought they had the same attessa-ets system as the gts-4

ye i assumed they have

i call my GTS-4 a baby GTR i will have to go and see them in the new year

ye i believe they run diff diff ratios but r u guessing there alot stronger ie different axels or u have it on good authority

i cant see nissan developing heaps of different parts for the 3 main kind of variety of skyline

yeah ur right mate...slippin or g-force i reckon causes the front diff to engage. when i boost the torque guage goes up, when i got ova a bump i guess sencing lose of traction and yeah in the wet

Wait.. I thought GTR's were RWD cars unless the rear wheels begin to slip? Say, with ATTESSA you have a 100% RWD car, but if you start sliding around on gravel the front wheels bite, up to 50% or something like that?

no i think thats wrong there constant AWD

i should of looked first

The ATTESA E-TS system an electronically controlled all wheel drive system.

Edited by Madaz
how r ya guys! just had the 32 dyno'd 2day. it only has an exhaust, injectors(the comp has been played with 2) and r32gtr ball bearing turbos i think. i thought it was running fairly stock but it surprised me pulling 204.3 four wheel kw's. at 12psi. it was a shock 2 me. but im stoked!! i was expecting 180-190 four wheel kw's

i know alot of u guys got cars that has heaps more power! im happy

i didnt think that r32 GTRs had ball bearing turbos.... only ceramic or N1 steel wheel

ok well i have observed while owning and driving a r32 gtr that just normal driving the torquesplit guage sits on 0% font 100% rear, start to accelerate, wheel spin or loss of traction and the guage starts to increase. depending on the circumstance, determines the amount of torque that is split. going by what i have seen in my gtr!!

Atessa works by G-FORCES. There are g-force sensors throughout the car so for example when it feels sudden acceleration etc it will start transferring power even without loss of traction.

That dyno result is good and is about the normal for those mods. I have done 226kw at all 4 with exaust, power fc but running 1 bar, so your car is on the money!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...