Jump to content
SAU Community

Recommended Posts

ok ladies n gents,

i am ready to fly..

I need tips n suggestions.. i want nothing under 300kw at the wheels for the start. this should hold me for at least 6mths b4 we tear the whole engine apart and add more.

i wanna start with that bullshit plastic front bar. it keeps scraping and is on the verge of falling off. what can i replace that with?

secondly, the car is goin into the work shop on tuesday to get ne air intake + filters and boost controller ( coz remember my baby was stock as a rock when i bought it with only 40,000km) the exhaust is on, the turbo timer is on, thats the basics down, the boost controller and filters will b dun by wednesday.

can we have an estimate of the hp/kw with those basics coz i cbf dyno-ing just yet..

Link to comment
https://www.sau.com.au/forums/topic/99717-help-with-my-modssuggestions/
Share on other sites

  • 2 weeks later...

300 kw at the wheels is a lot of power and your goin to need a lot more than a boost controller and an exhaust hahahahahaha. You need to spend a lot of cash to make 250 kw never mind 300kw. Try a computer, injectors, fuel pumps, adjustable cam gears, fuel pressure regulator, dump pipe, full exhaust and the list can continue to increase the power then you need the metal head gaskets, pistons, valve springs so and so just to handle the boost increase. Lets just say to get 300kw out of your RB20 your nearly running it at its full potential there only really good for a RELIABLE 400hp. Want anymore start looking at its big brothers.

ok ladies n gents,

i am ready to fly..

I need tips n suggestions.. i want nothing under 300kw at the wheels for the start. this should hold me for at least 6mths b4 we tear the whole engine apart and add more.

you would want to start with "tearing the engine apart" to support that power figure

i wanna start with that bullshit plastic front bar. it keeps scraping and is on the verge of falling off. what can i replace that with?

thats a great start.Getting rid of that bullshit front bar is one of the first key steps to the magical 300kw mark

ok ladies n gents,

i am ready to fly..

I need tips n suggestions.. i want nothing under 300kw at the wheels for the start. this should hold me for at least 6mths b4 we tear the whole engine apart and add more.

i wanna start with that bullshit plastic front bar. it keeps scraping and is on the verge of falling off. what can i replace that with?

secondly, the car is goin into the work shop on tuesday to get ne air intake + filters and boost controller ( coz remember my baby was stock as a rock when i bought it with only 40,000km) the exhaust is on, the turbo timer is on, thats the basics down, the boost controller and filters will b dun by wednesday.

can we have an estimate of the hp/kw with those basics coz i cbf dyno-ing just yet..

change the turbo timer to a twin turbo, that should help.I estimate 299kb ...Dyno is used for tuning so you "should be f**ked" "dyno-ing" your gtr??

hey mate are you in vic? you should jump in the wasteland with that sort of consecutive posting...lol

nah man nsw just at work reading ridicilous questions, I didnt know how to quote a few replies in the same post

hehe fair enough, well if you want to do that, at the bottom of each post you want to quote, click the quote button, and it will turn red then after you have selected each 1 you want, click add reply and you're set

hows that

300 kw at the wheels is a lot of power and your goin to need a lot more than a boost controller and an exhaust hahahahahaha. You need to spend a lot of cash to make 250 kw never mind 300kw. Try a computer, injectors, fuel pumps, adjustable cam gears, fuel pressure regulator, dump pipe, full exhaust and the list can continue to increase the power then you need the metal head gaskets, pistons, valve springs so and so just to handle the boost increase. Lets just say to get 300kw out of your RB20 your nearly running it at its full potential there only really good for a RELIABLE 400hp. Want anymore start looking at its big brothers.

It is a GTR, 300kw at the wheels shouldnt be that difficult..exhaust. Boost controller, power FC and you could be somewhere close

hehe fair enough, well if you want to do that, at the bottom of each post you want to quote, click the quote button, and it will turn red then after you have selected each 1 you want, click add reply and you're set

done

300 kw at the wheels is a lot of power and your goin to need a lot more than a boost controller and an exhaust hahahahahaha. You need to spend a lot of cash to make 250 kw never mind 300kw. Try a computer, injectors, fuel pumps, adjustable cam gears, fuel pressure regulator, dump pipe, full exhaust and the list can continue to increase the power then you need the metal head gaskets, pistons, valve springs so and so just to handle the boost increase. Lets just say to get 300kw out of your RB20 your nearly running it at its full potential there only really good for a RELIABLE 400hp. Want anymore start looking at its big brothers.

Man, he's got a GTR. RB26.

lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...