Butters

No, very different. Its real time tuning, so no chip in / out. You can also buy the software for it yourself. That means you can data log and make changes as you please(should you know what your doin). It pretty much does everything the power fc software does.

Yes your answered your own question there. Might have to take the starter motor of to get to all the bolts, there is 3 bolts and one stud/nut usually. Not to sure about the R33 but on a 26 the engine mount can make it hard to swing a spanner as well.

well i just posted a thread about this too but I was modifying a little more then just the turbo water lines I am planning to take the water feed from the block then return it around the front of the engine. Basically the opposite of what you have done in diagram # 2. You end up without the water line around the back of the head. Makes sense to me and its simular to how you mod the S13 water return system on the SR. Except the rb26 already has the water nipple on the top raditator outlet pipe. I am not sure this is the best way as everyone was a little to confused by me "ghetto" diagram.

I'm not convinced of that eh. I havea laurel crossmember in my silvia and the rb20 sits pretty high. I sat a r32 crossmember next to a cefiro one the other day and they looked identical. I didn't get the tape measure on it so I can't say 100 % but i'd be surprised to find that they are different.

best to call them and ask --> http://www.hyperdrivems.com.au/

Hyperdrive will do the nistune roms. Very good solution. This is my R32 GTS4 result with stock boost, stock turbo, just cat back and cooler. http://butters.throwinghandles.com/file_st...ts4livedit1.jpg

I thought so but I drew it so made sense to me ... lol Thats a good idea, Hadn't thought about that. Was stuck in the follow stock mode there. That will make it a lot easier, cheers for that.

How is it I post a thread asking for help and end up just giving information away without anything back ??? Yes its messy, it is a mock up Yep I took it off I think I give up with the help, cheers anyhow. Can the mods delete or lock this thread ???? or can I do it ??

ok this is the mock up pic http://butters.throwinghandles.com/file_st...eatermockup.JPG Be impressed if that makes sense to someone. Why do i think I will regret this post for days to come ....

I'll take a pic of the setup tonight. I bet that confuses you more though.

lol ghetto and I was going for more a punk style. Its a birds eye view from the underneath which probably doesn't help things. The right hand side is the front off the motor, the left the rear obvious. The top section is the plenum side, underneath mostly or if the plenum wasn't there. One thing to note the AAC / cold start valve has been removed from this system,. might be why it looks so foreign.

Been looking for a portable sat nav / gps to use whilst in japan. So far i have figured out that TomTom has no jap maps. The two options I have found are Garmin and using a Sony PSP with a GPS add on. Both options only seem to have the maps in japanese though. Has anyone used a GPS in japan ? Any suggestions people ?

lol, I saw your name on the reply and was oh heck .... here we go. Translation -> "its too hard"

ok re-designed the heater hose system on my rb26. Not keen on running the turbo coolant line around the back of the head. Personal preference. This is what I came up with. http://butters.throwinghandles.com/file_st...26Waterflow.JPG Will it work ? See any problems ? Any suggestions ? Can post up what it looked like orginally later tonight but keen to hear from guru's that already know the rb26 heater / water system. Also please excuse the shitty paintshop pic .... drawing not my thing.

I think i got one of your runs MrSparkle. Will try and get it online over the next week.

Some more vids

plex write up --> http://www.motorplex.com.au/news/news%2007...07_10_29_1.html and the results --> http://www.motorplex.com.au/news/news%2007...liminations.pdf

15 psi by 4500 on an rb26 sounds really laggy to me. I had an .82 gt3540 on my sr20 and could get 15 psi by 4400 no problems. It was a built motor with cams but you would expect the 30 % extra capcity of the 26 to well beat the SR20.

Correct me if I am wrong but they are supposed to be in the main plate behind the throttle bodies and just before the head.

Flyer for the event. http://butters.throwinghandles.com/file_st...%20bulletin.pdf

I think a point here is he has not actually had it tuned. So it makes more power when it has more boost but becuase there is more boost the tune is screwed and he has lost power in other parts of the rev range. Is that what you mean ? In answer to your other questions 1> shift point is complicated. You have to rev it slightly past where your peak power is but same time make sure your next gear is not left in lag city becuase you short shifted. So you really should use the trial and error method but start around 6500 rpm and see where that leaves you in your next gear. 2> No different power in different gears as you have different load levels and boost. 3> Possibly, often the smoother tune will beat the tune with higher peak HP.

http://www.motorplex.com.au/calendar/drag_...%20October.html

No Pics handy, can take tonight. Laurel surround will not fit an R32 sorry. All PM's Replied.

Following for sale. Rb25det CAS $80 SR20DET Coil Packs set of four $150 Rb26 Stock Turbos $250 the pair Rb26 turbo water and oil lines complete $200 GTR Clutch(top condition) WITH FLYWHEEL, suit manual convo, also suit rb20 / rb25 $200 Laurel / Silvia I think manual pedal conversion $150 Laurel Manual centre surround. $50 Laurel / R32 clutch Hyraulics master / slave $50 Geniune Sparco Fixed back race seat in red torn but still very useable recover and be like new or just use as is(no rails) $100 Set of mis matched drift rims and tyres. pair of grey 5 spoke with good Potenza re-01 tyres and pair of blue mesh with shagged tyres. All 15" and 4 x 114.3 stud I think suit the AE86 drifter ??? $150 set. All prices pretty firm as I think there very reasonable. Please PM for contact details. Pics on request but please don't ask for pics of coil packs /diff / etc you know what they look like !! In Perth WA. Will send COD at buyers expense. Will not hold items PM / POST / phone call of "i will take that" guarentee's nothing. First to door with ca$h gets item

Does it come with RB26DET AdaptaLink and the air temp sensor ? Cheers