AlexCim

will get around to pics this weekend i hope. Ive taken them, on my phone, just nothing but the laptop that just broke has bluetooth in this damn house!

ska, care to merge the threads?

its blows my load

lol, oops. Yes these are the whitelines. Already talking to skidkid about them going into an S2. Let you all know the outcome.

tidy, but this thread will be closed....right.....now!

I dont know, I am undecided but as far as it looks to me, - behind the rear door its too short, but the doors look OK. - the roof only has 1 sunroof no 2 - JP normally make kits for cars like cimas, celsiors, centuries, glorias etc. VIP's not wagons. - Proportions look f**ked up

remove the front drive shaft from the front diff then pull the shaft out of the transfer case.

i dont get it either. i like the rear numberplate holder in my car, it is very tidy...?

R33 gtr would be my guess too. check the plug when you get it, compared to r33 gtr pinouts and go from there. i doubt they would use a different ecu/harness just for the stagea given it was an aftermarket modification to stageas by autech.

Champ, This is the best handling suspension package I have encountered in my life for the street. The quality and engineering behind this entire kit is beyond imagination for the cost. I am not selling it because of poor quality, rather my car is being returned back to standard in preparation for some repairs and then sale (Loose less with stock parts back on) I 100% back this entire kit and I am certain you will be 100% satisfied with its performance. Infact, the next car is going to be an R32 GTS4. It currently has a full suspension package which I am removing to replace it all with the full R32 kit Regards, Alex

Champ, This is the best handling suspension package I have encountered in my life for the street. The quality and engineering behind this entire kit is beyond imagination for the cost. I am not selling it because of poor quality, rather my car is being returned back to standard in preparation for some repairs and then sale (Loose less with stock parts back on) I 100% back this entire kit and I am certain you will be 100% satisfied with its performance. Infact, the next car is going to be an R32 GTS4. It currently has a full suspension package which I am removing to replace it all with the full R32 kit Regards, Alex

Champ, This is the best handling suspension package I have encountered in my life for the street. The quality and engineering behind this entire kit is beyond imagination for the cost. I am not selling it because of poor quality, rather my car is being returned back to standard in preparation for some repairs and then sale (Loose less with stock parts back on) I 100% back this entire kit and I am certain you will be 100% satisfied with its performance. Infact, the next car is going to be an R32 GTS4. It currently has a full suspension package which I am removing to replace it all with the full R32 kit Regards, Alex

Stock arms with whiteline bushes installed. Will need swapover with stock arms with stock bushes. Asking $70 +freight front castor with swapover Asking $80 +freight for all four rear upper control arms with bushes installed (You are saving a lot of money here as the bushes are already pushed into the arms so they are ready to use) No pictures sorry, arms stay in until someone buys them. Phone:<removed>

Bought these about 10,000km ago. Both front and rear struts for sale as complete units. Want exchange for stock suspension struts (need something to drive the car around with). Rear shocks also have new dust cover kits Heights are already set at nice streetable heights so no need to change them, just 3 bolts to remove each strut and repalce, off you go. Much easier than what I did. All 4 as a package, cost me $1300 new and I've assembled them and trial and error'ed the heights, asking $800 + freight the lot WITH SWAPOVER for stock suspension struts. Will have pictures up in the next few days. Phone:0439 909 610

Bought these from www.autospeedbits.com.au for $280 delivered. Traveled ~5,000km if that, barely bedded them in. They are 0-500 degree pads, very good for street and for winding roads. Big difference to performance of the brakes. Front pair only, asking $200 for them with free delivery. Pictures will be up in a few days. Phone:<removed>

Pretty much as par this thread. http://www.skylinesaustralia.com/forums/in...c=92828&hl= Only difference is that the cooler just has a few more stone dents in it. The end tanks also have holes punched in them but are very easily fixed, just need to be cut up and cover plates welded on. Mandrel bent STAINLESS pipes cost me $1100 and cooler was $250. Asking $600ono the lot + freight Pictures will be up in a few days of both the pipes and the cooler. Will want a change over of the air snorkel though as it needs to be for the piping and I need a stock one. Phone:0439 909 610

BOS importing model. http://bosimporting.com.au/index.php?page=...t&Itemid=27 I paid that price + freight. Been on my stagea for about 6-8 months now. Very little if any rust, not scratched up much or anything. Asking $300 + freight. Will post pictures up over the next few days. Phone:0439 909 610

Used front and rear swaybars for S1 stagea. Been used for about a year, but how used does a metal bar get They are the same spec as the ones in the group buy (they are from the group buy ) Asking $360 the pair + freight. As par this thread, http://www.skylinesaustralia.com/forums/in...showtopic=85592 Come with some extra grease and a gaurneteed fit. Pictures will be up in the next few days. Phone:0439 909 610

Been used in my Stagea since my std coilpacks shat themselves. The SplitFire Super Direct Ignition System is designed exclusively for the Japanese T high performance engine. This system replaces the original equipment coil pack and ignition wires with a direct ignition coil on plug system. The increased ignition performance found with the SplitFire Super Direct Ignition System is a must for all racing and performance enthusiasts. - Increases horsepower at the top end of the RPM band - Ensures and maintains maximum energy supplied to the spark plugs - Reduces incomplete combustion caused by misfire - Eliminates RFI (radio frequency interference) by eliminating the need for a wire set - Easy installation designed to fit the high performance engines Been run with no cover so they were a lot better ventilated. All 6 have about 5,000km on them, so basically brand new. Cost $800 new Asking $500 + freight, WITH SWAPOVER for GOOD WORKING stock packs (I need something to replace them with dont I) I am willing to send them out before I get other coilpacks in return as the car is off the road at the moment anyway, but I trust you will send me the stock ones. No pictures, its pretty standard. They look like the stock packs, but blue Will get pictures if you REALLY want. Phone:0439 909 610

http://bosimporting.com.au/index.php?page=...t&Itemid=27 The $440 catco cat with flanges to suit R33/Stagea. Maybe 20,000km use. Adaptor hole for exhaust temp sensor (currently blocked off) Asking $250 + freight Pictures will be up over the next few days. Phone:0439 909 610

The catback has been crushed mid muffler FORWARD (towards the cat) Can be easily repaired by replacing that length of pipe with a fresh pipe. Details on this exhaust can be found in this thread, http://www.skylinesaustralia.com/forums/in...=90146&st=0 Muffers both in good condtions (not crushed and a few scratches) but rear muffler does produce a popping noise on idle, but that goes away anything above idle and makes a really nice throat tearing noise. 84dB at 4800rpm, so VERY streetable. 3 inches all the way. Stainless steel good quality japanese exhaust New cost me $1100 ex JP Asking $500 + freight Pictures will be posted in the next few days. Located in Melbourne SE ship AusWide though. Phone:<removed>

how much for an AP eng PFC for RB20DET R32 GTS4?

the gazebos dont come with guy ropes, but the covers do have loops in them for where guy ropes and pegs could be used to peg it down. you could also sandbag/lead sheets the legs

lol let me rephrase the aftermarket braided lines, aftermarket pads and aftermarket rotors will all be sold. the stock lines, stock pads and stock rotors will all go back in. I dont throw away ANYTHING that i remove (unless its well and truely dead/beyond repair (aka, old bushes))

3:30am last night, 2.5H We went to maccas instead