arep3

3 is a good number. i like 3

I have several years for this. tell me your VIN code and i will give you the exact number you need.

bumps

borrowed a mates helmet today. soo lookin forward to this!

as soon as i leave work im off to the bottle'o! thanks for the damn good idea paul

Not the same sorry mate

sale fell through. back up for sale

Had another look mate and all I can get is the same part number so i'm GUESSING that they are the same part.

47210-05U01-

That'll be a looonnng way off. After i buy the shotgun! :laughing-smiley-014:

ok chill pill taken. was cranky sucka cos i needed sleep. or somethin like that. still, when people don't read stuff and the same question gets asked over and over... you get my point

Is this 1 set?? I didnt know that you could get twin projectors like this. do these only need 1 ballast per headlight?

I got the idea today to get an old set and cut the projector and parkers out of it, flip that upside down and mould it into the middle of the headlight assy to replace the highbeam section. It would look like parker, projector, projector, parker. The parkers closest to the grill could then be connected to the fog light switch with some fogs installed. Just as long as it cuts through the fog, then all good. It's not like people drive around with them on ALL the time like commonwhore drivers!

I searched for the air temp sensor but only found air bag sensors. Mind you i was stuffed last night. I'm thinking it could be an exhaust temp sensor (even though its located before the exhaust) the program can be funny like that I reckon. Can anybody that know's which part we are looking for help out?

Sorry I get cranky when people don't read whats been written already. The clutch lines were posted late last week. They will arrive soon. The brake lines will be posted this week sometime if things go according to plan. If people want to know how much things cost, read the 1'st post. It's not that hard is it guys?

Ok here goes. The bigger seals around the top of the injector is : 16635-78A00- The Coolant temp sensor i get : 22630-71L00-

normal driving on my way home from picking up my car from rebuild with a new clutch. changed down a gear like i would do if i wasnt using the brakes and car locked up under compression. heel toe is good if used in the right manner, little old grannys in honda jazzes wouldnt exactly be going fast enough to warrant heel toeing.

Do you have the projector headlights or the square looking one's? Wouldn't it look a bit funny if there was one set of projectors in a round opening and one set in a square reflector? This is what I was thinking of doing when I had the spare cash. I would keep the glass cover and see if I could have the lines inside it removed by a glass blower or something. Don't like the idea of having the perspex going faded and yellow like R33's. Now I'm looking at bi-xenon in the projector and making the current high beams fog lights.

bumps

Just curious as to how you will fit 4 projectors in the headlight assy. I have been thinking about 4 but today i got the idea for bi-xenon projectors and making the current high beam a big set of fog lights connected to my fog light button! yet 4 projectors would be nuts.

just got another letter today. 1 more point for my record! YAY! oh crap does that mean i get another letter soon?

The o-ring seals on the injectors are all the same. The bigger seals at the top of the injector head where they fit into the fuel rail don't actually seal anything. They are there to act more or less like a shock absorber. The only seals to worry about are the o-rings.

I would like to say to anybody that wants to improve their lighting with hid, DO SOME RESEARCH! From what I have found out with my RESEARCH is that the only hid kit worth buying is anything Phillips makes and nothing bigger then 4200k. anything over that and you will have bad lighting, blinding the oncoming traffic, eye fatigue etc. Retrofit so what you would do if your headlights are NOT designed for hids. R32GTR projectors are not designed for hids. yet Marcus here has retrofitted Honda Euro projecters into his headlights because they are designed for hid. Retrofitting is the term used to describe the install of lets say for example a projector from 1 cars headlight to another cars headlight assembly so you can then install hids properly. heres 8 pages of reading goodness. Xenon Hid Lights Conversion For R32GTR

BUMP!