Tangles

awesome work, nice opening move on the video.. makes me wanna race

the toshi remap is awesome !! so loving it, but running mine off piggybacks for air:fuel and timing, plus soon also injection re-dynoed last week and its the best the stagea has ever been in the process of saving for a wideband sensor kit, and will remap to suit better air/fuel+timing+injector settings on a dyno tho. roadtuning is moreso for logging data for the finetune.

factory glass along back side and slightly to rear, might one day do a light front tint UV Cut glass, it's seraphic glass and the "tint" as you say is mixed in with the molten glass rear window has a factory uv coating

damn she is travelling fine after the recent tune need track time.... 1997 Series 1 Nissan Stagea RS V Four Station Wagon, 103,500kms, Auto, RB25DET engine, Attessa 4wd, Silky Snow Pearl, Dayz bodykit, Fresh fluid throughout, 100,000km service done incl. new water pump, belts, exhaust studs, all fresh fluid throughout such as p/steer, radiator, attessa, diff, gearbox, engine, brakes, etc. Engine: Ryco Z201 fuel filter, Ryco Z145 oil filter, Motul 10/40w engine oil Davies Craig automatic transmission oil cooler upgrade kit MV Automatic shift kit & auto service kit Koyo Radiator upgrade Splitfire coil packs NGK BCPRE6 0.8mm copper v-groove spark plugs Bosch 040 fuel pump with direct battery feed at 13.8volts Aerospeed adjustable exhaust cam gear pulley wheel Greddy remote oil filter relocation kit & Fujimoto sump plug drain valve Nismo adjustable fuel pressure regulator Nismo Z32 Air Flow Meter 3inch JustJap stainless steel single dump pipe system (turbo to cat) 3inch high-flow metal race cat 3inch cat-back exhaust system with Kakimoto Gtr racing free flow muffler Cold Air Radiator air guide (feeds radiator / pod / intercooler) Cold Air Induction aluminium box w/ lid setup, foam internals, using standard snorkel air feed Trust 600x400mm FMIC bar & plate, with custom return air feed pipe kit Apexi power intake pod filter Apexi electronic boost gauge Apexi SAFC Super Air Fuel Computer Apexi SITC Super Ignition Timing Computer Greddy Profec-B spec-ii dual stage Electronic Boost Controller, set to 1bar and 1.1bar HKS heavy duty turbo actuator Sliding Performance water/oil cooled 360degree bush bearing Hi-Flow Turbocharger, 206rwkw at 14psi Toshi ecu remap, tuned by Boostwerx Ported headwork including new valve seals, valve seats and valve guides EPP Clear camgear timing cover Cometic head gasket 87mm x1.2mm Cometic gasket kit including rocker cover, intake manifold, intake collector & exhaust gaskets ARP head stud kit Tomei 256 intake / 256 exhaust poncam gear set Tomei 8.8mm high lift springs Tomei oil gallery restrictor Suspension: Bilstein front and rear suspension shocks, with ‘lowering’ circlips, using standard springs Whiteline front and rear adjustable swaybars Dayz adjustable engine swaybar, custom boot swaybar Whiteline front castor kit Whiteline rear subframe alignment kit BJR Graphite 17inch rims with Marshal Mactrac TX tyres, 235/45/17 Brakes: Maltech stainless steel braided brake lines, front and rear DBA slotted front brake discs Benidx Advance front and Heavy Duty rear brake pads Audio: Clarion stereo tape unit with 6-stack cd player Clarion amp mounted to enclosure for Clarion 10inch subwoofer Pioneer 260w 4-way front door speakers Eclipse 80w 2-way rear door speakers Razin volt stabiliser kit Car alarm Not Yet Fitted: 2x 700cc Sard injector external intake manifold setup HKS AIC-IV additional injector controller serie-4 3x 2" DIN gauge setup including boost pressure, oil pressure & temperature Install second-hand heater core assembly, Install wideband air fuel sensor guage kit Touch up body panels & mirrors for minor marks, using my Silky Snow Pearl paint Purchase $1500 GT2871R 450hp garrett BB-turbo from HyperGear & sell Sliding Performance turbo Remap ecu chip thru The Speed Lab, retune at BoostWerxs pleasure to own & drive, faultless,

WANTING a track day anyone know the upcoming calander? cant seem to find anything re: mallala track days need track time - my stagea is really really good atm & I need to try it flat out

if it aint been checked for oil, or been maintained - then of course there is !!

sounds like maybe you gave it some too much, too early, and didnt look after her

the r35 looked great in front of the v8's

i had a nasty noise for a little while, lol put some soapy water into the window-washer bottle, but no it was radiator overflow lol ended up with soap burning on the turbo shaft lol all burnt out now tho and goes better then ever (as proved on this weeks tune) !!!!

r35 gtr > audi r8 enuff said pete

the nissan consult can read the following programs, find them on the net and d/load Features : - Interface fitting for 14pin Consult Port of Nissan vehicles. - Heavy & robust casing for rough service use - Connects to PC via RS232 - Powered from car battery over 14pin Consult Port of Nissan vehicles. - LED to control power and clock function What can you do with this interface? - Monitor and Log dozens of realtime parameters - Check and clear engine fault codes before going to an expensive auto shop - Adjust the timing and idle - Power balance testing - Reset the self-learn codes - Control idle air valves, relays (AC, fans, etc), timing - Diagnose customer vehicles on-site - Speed up troubleshooting of electronically monitored components Available software working with this Interface: (Note that some of it is not free and need to be purchased) DDLreader: DDLreader v.15c / DDLreader v.16c ConZult ScanTechNissan Z-Control SRTalk v.1.0 ZCSetup v.2.0 ZTalk v.1.1 Nissan Data Scan v.1.4 Nissan Data Scan v.1.51

will do - already got my paint in two tins and spec sheet etc, from Protec paints yeah would love a price ! cheers mate

cheers, yeah i7 is sweet (same goes with the mobo and ram - gift, yay) yeah the asus p5e can use the Maximus Formula bios for sure, however it is updated to the current bios spec. anyone want WD 320Gb (3-off in all) ? cheap make an offer, but been error-prone for me. desktop weights atm.

no no thanks very very much, havent really chopped photos b4. sorry, wont ask again - get back to the studies !! and best of luck too. cheers for the pic as requested, muchly appreciated

thanks mike. appreciated ryan I agree roof - I wouldnt do the white stripe on the outside of the rail racks, up the windscreen along & down back. but yeah, NO not good bonnet - can I have a photo shop please of bonnet only in a shiney black ? if possible? please? cheers yeah, at this stage Um no, just rust fix and fixing body-touchups

hey dude nah she's sweet mate pleasure seeing you again come up one day dude, yeah great value there I reckon, freebie cpu cooler too asus P5E mobo (rebadged Forumla x38) + 4gb OCZ bronze 667mhz ddr2 ram + Intel Q6600 pcu + Coolermaster Coolingpro 850w sli/xfire psu + 19" lcd screen and Thermaltake typhoon cpu cooler will be a good system build, use a 3870 or a 4850 ati card and you'll see 17,000 3dmarks with the cpu at 3.6. runs fine at 3.6 but if hot and unstable-ish 3.2mhz is a sweet spot, same with 3.33. ram hasnt ever been o/c'd, and the last half year saw the cpu at stock on the spare computer spare pc DFI Lanparty X48 Intel QX6850 Patriot extreme ddr2 800mhz 3gb ati msi 3850 450w psu + case my pc Asus P6T x58 deluxe with o/c palm Intel i7 920 G.Skill 1600mhz ddr3 tri-channel kit 6gb ati asus 3870x2 + gigabyte 3870 Lian li pcv-2010 mofo case and fan controllers Antec 1000w sli/xfire psu 3x wd 500gb raid 1x wd 320gb OS 1x WD 34gb Raptor LG blueray burner + LG dvd +-RW Sounblaster x-fi gaming pro 24" Acer B248w lcd widescreen G5 mouse + G15 board + 3dpro joy Billion adsl router + HP PSC1600 print/scan/copy etc. etc. not ONE blue screen of death with the i7 - its a fantastic chip and the board is neat. expensive but luckily 2.5k worth of "gift"

bump dont care if sells or i use it.....

ebay !!!! "nissan consult" search ebay should get it today / tomorrow

Ive ordered and paid for a nissan consult unit, disc and cable - $50 hope it works tho (14-pin ?)

the t-bolt clamps I run are around $10? from agriculture supply depo's - for use in plumbing etc. excellent quality, only 1 has failed after numerous do-up, un-do, do-up, un-do, do-up, un-do, etc procedures

yup ^^ excellent advice in that webpage, followed it (mostly - some builders advice / some mototuneusa advice) when I ran-in my race-spec rebuilt CBR Fireblade read this web page, it explains a lot, in words / details you can easily grasp and understand the principles

on the road Ive upped it to 1bar at around xxxkmph it starts tappering off boost on road, tappers down 1andabit psi to 13.5 got to cut the fmic lead pipes out of the fmic and redo a pipe, then should be ok - apparently

Ive got a unit called StickyPod mounts cameras, recorders etc, suction cups or screw frame used it on my motorbike rides a number of times would be fine mounted on the roof/bonnet or inside of course

200kw at 13psi will grab a garrett-bb gt2871r 450hp version, re-do the remap ecu chip, and gain 10-20% moar . MOAR! I say ! but as is - BEST tune ever on the stagea, feels best it has in my 4yrs ownership. Tonight I'll be hill'ing it a little me thinks

yes for sure waiting upon 07 tax cheque return, then will order a GT2871r 450hp garrett-bb turbo from Hypergear, including lines etc, bolt-on. will do the mirror rust fixup, and perhaps black pearl paint to the roof, bonnet and mirrors then a rechip ecu map over a 4wd dyno from jeff at The SpeedLab, retuned for the better turbo & current set-up