The Bogan

Rear pulleys are getting coated and final assembly this week

Harley Davison had to remove their Screaming Eagle super pro tuner from the market, within a couple of minutes the aftermarket came to the rescue with a few options. You can still buy a brand new Harley and tick all the hi-po mods, cams, heads, intake, exhausts, hell, you can get a whole new big bore Screaming Eagle performance engine that the dealers will fit to your brand new bike, with a warranty, with a Maximus or some other tuning box supplying the tune. But, truth be told, if the dealers don't do it, the people who are going to modify their bikes would just find some local bike shop to do it anyway. Just like when people buy a car and send it straight to some speciality tuner shop for the "stage send it" As soon as you play with the tune the car or bike is basically illegal here anyway. What hurts is the heat seakers with pop and bang tunes, or coal burning diesels Idiots driving around going pop and bang and coal burning bring the heat, and the publicity Like when the authorities cracked down on all the 6" lift kitted cars, or the slammed cars, or the whistling BOV, ect. ect. What's more of a concern are all the old trucks that are cruising around the cities I know trucks that roll in the cities, doing runs from ports that can use 1 ltr for every 2km, and poors out more poisonous gases than 10 modified cars could in an hour These trucks are typically running 12 hrs a day, 6 days a week This is where the EPA should be looking, and the government should be helping by giving owner drivers subsidies so owners can sell their old trucks for new, more environmentally friendly diesel or EV for running trucks around the cities Meanwhile, I'm driving a modified old V8 and a modified Harley, so there's that........🤡

Ordered from QLD at 1705h yesterday Sydney time, were waiting for me at work at 1200h WTF WITCHCRAFT

Got bored this morning and serviced the bogan cruise "bike", changed the engine oil, 20w 50 and the filter, the chain case and the transmission with 80w 140

What do you use the car for? For the amount of money you would spend getting 20hp out of the 30 with NA mods, you could have a good chunk of cash towards a little boost netting alot more, lots of kits available You would need a few drivetrain solutions though Hammer time

Got bored and checked brake pad wear, rear were still pretty fat, fronts only had about 5mm left so.......got some Forza FP2 front pads on the way from Brakes Direct $139 delivered Not bhed, good price

Fark the 3 pointed swastika pos Or sell up now and buy a 3 pointed swastika and regret????? The old Datsun is gold dust, any muppet with a job can own a BMW My 2 cents is to stop treating the old girl like a dirty bitch Not saying to not run her hard, just saying to not treat her like a dirty slart

Looks a million bucks, noice

Called Harrop today to see when they are sending the HTV2300........well, Covid has struck again, it seems everyone, everywhere, are ordering stuff, lots of stuff, therefore......massive backlog for ordered parts. They start fabricating 2300's for LS1 applications on........ 19 March..... They did say mine will be one of the first to be shipped though

I carry a brick to chock the back wheel The brick also comes in handy late night shopping after the shops have closed One night, out late with the Mrs, she spies this nice little dress in the window of a shop, she asked "could you get that for me", so I get the brick out, smash the window, and give her the dress....a little further down the road she sees some shoes she likes and askes "could you get it for me"....I got a bit angry at that and said, "what, do you think I'm made of bricks".......

I build stupid cars to daily Life is to short for a boring daily I ❤ all go fast builds

I'm talking about the exhaust/turbine housing and dump/screamer pipe That's looks like bonnet and firewall paint melting stuff I had a highmounted old TO4ZE years ago, the heat coming off that was intense, even ceramic coating didn't keep it in check I recommend some form of beanie for the exhaust housing and some form of lagging/wrapping for the dump and screamer at least

What are you doing for thermal protection mate, shits gonna get real hot

Did the cooling system flush with Rislone flush, although the system seemed clean and nice and red, and was flushed 12 months ago with the SCA flush, after the flush the red turned brown and lots of crud drained out, then flushed the engine and core with clean water for a while before the water cleared up, then fitted the new OEM rubber coolant hoses and jubilee clamps, filled with Penrite red coolant and demineralised water Also swapped out the diff oil with some Penrite pro gear 80w 140, I used Nulon 80w 140 last time, 12 months and 15k km ago, but the diff was a bit slappy with it, the Penrite has worked well in keeping it quite 20 minute test drive and miraculously no leaks Hopefully I can put all the undertrays back on tomorrow

Found a minor coolant leak, the coolant hose from the overflow to the engine, the clamp has seen better days, and I'm hesitant to just get a new clamp in case it is actually the hose on its way out so, as I tend to do.....I'm replacing all radiator hoses and clamps Lets hope the weather stays good till the parts arrive, riding the bike is the rain sucks balls

I found the power issue You seem to have a dog jammed in your exhaust pipe That would cause a mad restriction

Just strip out the interior.....................and go camping in it

More information is required

Yeap, my fuel system needed the Ford green top 42lb- 440cc injectors to get it up near 360-400kw The stock 28lb - 300cc only got me 260kw at around 90% Dommegabudget

I'm also looking at these things Costco have them for $1900 https://www.costco.com.au/Automotive/Car-Accessories/QuickJack-Car-Lift/p/8513217

Isn't "fat cruise ship" a gender nowadays

Where was this?

The old window tint was a bit worse for wear and I was umming and arring about replacing it, or at least, removing it After ringing around to see how much it would cost for a tint joint to remove it........I went onto ebay and got overnight parts from....China With the $100 steamer it took about 1.5hrs from the start to the finish No glue, no residue, after pealing it of all it needed was some windex 100x easier and cleaner than using a heat gun