Bass Junky

Did I mention to you all that a condition of buying one of these guides was that you have to vote on AussieWheels.com and give me tens?? If you dont, the tiny little piece of C-4 explosive will explode 10 days after you recieve your guide, thus blowing the front of your car apart........ Click on the link in my sig if you want to keep your paint.

NJR I have fitted and removed my guide about 20 times and havent had any trouble witht he bolts. The correct bolts are obviously the ones that hold in the bollet latch mechanism. 12mm Ring Spanner should do the trick. Getting them bolts back in should be by hand until almost tight to make sure you dont strip the thread. DON'T use a shifter. They are are the enemy of bolts. They bolts are quite tight to get off as first, as they have most likely never been removed and are covered in a layer or factory paint. Get a 12mm Ring Spanner and it wont be a problem. BASS OUT

Should be okay Coxy. Havent been cut yet. You are a very lucky man!

COXY Let me know about the Air Guide NOW please

Coxy, You Have Minutes.

Coxy. You have about 15 minutes to tell me what front bar you have. Is it a standard one, Nismo (or Nissan Motorsport, like the one in my avatar or on my page on Aussie Wheels.com, check my sig) or an aftermarket. The second batch is about to be cut TODAY. PLEASE ADVISE ASAP Okay guys, The foam is to put on the underside of the bonnet, just next to the bonnet latch thingo. Unfortunatly, because of the height of the grill bit on the Nismo bars, this is unavoidable. I will post some pics in a little bit showing mine.

talk to kristian at Japanese Import Parts. That's where I got mine. www.japaneseimportparts.com

Okay ppls. The Standard and Aftermarket bars are off being cut. I've fine tuned them a bit and they will be perfect on your cars. I expect them back early next week and the bending will be done pretty soon after. Sorry I couldn't get them for autosalon I as promised I would, but sometimes your day-to-day job just doesn't allow you the extra time to play with your hobbies. Sorry to those at AutoSalon who don't have their guides. If I do get them back today, I might be able to get one to you but I'll let you know later. BASS OUT P.S If you are in Autosalon with your car and really really need the guide, please let me know and I might be able to swing a favour with my subbies to do them this arvo.....

I got my R34 Financed through a finance company in Sydney. Laurentide finalcial services. The actual finance is through the Westpac. The car will need to be less than 7 years old by the end of the finance. The car will need to be for work purpose (Commercial Hire/Purchase) I got mine no problem. Rang a few places and because of the 7 year thing, most people could only do 3 years with big residual, but I got mine on 4 years, 30% You might also have trouble if you are importing the car yourself. They don't like that, as the car will be owned by the finance company until the end of the terms. I bought mine privatly and that put a lot of companies off. I had to get a full inspection on the car done before they would finance it. Now I'm the happy driver of an R34 GT-T for $506 per month. Interest rate is about 7.25% BASS OUT

Hi ppls. Measured up Daz's bar last night. The 'hack' bar has been ground some more and re-bent to suit the gaping hole that is the standard front bar. I will be modifying the drawing today and shooting it off to my subbies to cut. Maybe, just maybe they will be finished before the weekend. Depends on the current load at my subbie. I'll keep you informed. Cheers BASS OUT

Hey ppls. Well, all the Nismo bars are either delivered or on their way. Adzmax, Redbaron have been delivered in person, Muz and NJRs have left today and and Abo Bob (check your pm for the story) will leave tomorrow. The standard and aftermarket bar versions will be measured up tonight on Daz's car and hopefully cut tomorrow or Thursday, and bent up on Friday (all going well) and they should leave early next week now, as I want to trial fit them to Daz's car before they leave. I actually trial fitted all of the Nismo bars to my car on Saturday before I sent them. Anyway, when you all do get the bars, please give me a trader rating. Thanks BASS OUT

Driver. Do you want a radiator guide for you car?

PS is "French Horsepower" 1kw = 1.359621617 Stall Converter or "High Stall"

Okay. I spent a few hours today test fitting each and every guide to my car. I needed to relieve a little bit of the aliminum from the edges near the support panel, but you can't tell but looking at them in the engine bay. The reason I had to do this is beacuse the bending was about half a degree out. But alls well that ends well. Adzmax and Red Baron will recieve theirs at the Take on Meet tomorrow, I've also included some sticky back foam for putting on the underside of the bonnet to eliminate marking the guides, as the bonnet gets very very close to the guides when it shuts. There's no way around this. So, you people with the Nismo bars who are out of the state from me, they will be shipped on Monday after being carefully packaged to try to eliminate damage. The standard bar people will be having their bars cut on Tuesday/Wednesday and the bending done probably Thuresday, and hopefully dispatch them Thursday afternoon for a Friday or Monday delivery. I'll let you all know the status of the stuff as I do. Cheers BASS OUT

the lady in the Supra was anything BUT stock.

Is it just me or does the Group Buy not work??

Okay, ErikTufa, Abo Bob, Afro, Muz and NJR34GTT Please check your pms. Looks like the standard and aftermarket bars will be dispatch mid next week as I have to drive to Bendigo (2.5 hours from me) tomorrow for work. Means I wont be able to play with the standard bars until Saturday at the BBQ. Anyway, check your pms for transport stuff. Let me know if you have any problems. Cheers Pete

Adam, Anytime. Tomorrow is not good though, but anytime on the weekend, after 12 on Saturday or even at the BBQ

Muz, I've checked with TNT and the rate is $29.60 on the sensitive service which I think is best considering it could be bent easily. I'll PM you with all the details.

Muz. If you can transfer money over the net, I can freight via TNT at very reasonable prices. I have company discounts.... I'll get a price in about half and hour.

Abo. Just jump in and start driving!!!

NismoR34 Standard bars will be cut in the next couple of days. I just have to do a little bit experimenting with the 'hack' guide tonight with Daz. I'll let you all know tomorrow morning.

Okay ppls. The Nismo bar guides are in. See photo. Come and get em!

oh well. It wasn't Just Cars doing the ads. It's an advertising agency, who hire a film company. Just cars couldn't care less what the ads are, as long as it gets them business. Fair enough though, that's business

Do they feel heavy to lift? If not they are light weight. GOLD bwah ha ha