Jump to content
SAU Community

Recommended Posts

Hi guys

I've just recently bought an r32 GTR and am absolutely loving the car.

There is only one small problem - every now and then when I am driving around (but predominantely when i'm cruising in the hills) the cabin of the car fills with a strong gas smell. I cant think of what could be causing it, except for possibly a leak in the air-con gas? Has anybody else had this problem or know what it could be that is causing it?

cheers

dave

Link to comment
https://www.sau.com.au/forums/topic/100585-strange-gas-smell-in-car/
Share on other sites

In the hills eh? Could it be your clutch slipping ever so slightly? If it is, the smell will come right through the cabin via the gear-shift.

that sounds like it could be it coz every now and then when i put the boot in it slips when i change to second. Is it anything to worry about, or just general wear and tear that tells me it might be time to look for a new clutch?

Well.. definately time to start thinking of a new clutch!

The more it slips, the quicker it'll die completely. Well... to the point where you can't go over 3000rpm or generate any boost at all because it slips too much. I should know, I had that for a month before I changed the clutch.

You'll have to get the flywheel machined at the same time, cause it's prolly toasted, burred, and lipped.

If you take it easy and not slip it too much, it should hold up for quite some time... not so fun when you can't put your boot in though!

Glad to hear I may have helped. Good luck!

A quick and simple test is to try to drive off in 3rd gear. You will soon find out if the clutch is slipping. My question though is what type of smell is it. Have you ever been on a train and get that pugnet smell? if so that its brakes and the clutch smells almost the same. It can't be the the air con because if it was leaking the smell would be long gone.

Randy's right if it is the clutch it will only get worse and not far into the future. Get it looked at soon,,,not every flywheel needs machining because of a slightly slipping clutch,,,mine didn't.

Neil.

cheers for the help guys.

Cant say i've noticed the pungent smell on trains....besides the one coming off half the passengers....

It is quite a strong gas smell like natural gas, say if you've left an element on your stove on for too long with out lightling it.

Got any tips on good clutches? It has a haevy duty puck clutch at the mo, but i think i'll probly put a double plate in, heard they're a bit more durable.

Does your car still have the Charcoal Canister in it?

If it doesnt you way find that on the end of the fuel tank breather line(which runs into the bottom of the charcoal canister) may be open free to air or have some kind of breather on the end of it. Have seen this on a couple of R32's GTR's and GTST's...

Just a thought anyway...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...