Jump to content
SAU Community

!urgent! Plz Help Asap !

R32GODZILLA
 Share

Recommended Posts

R32GODZILLA Rookie

R32GODZILLA

Posted
Posted

!!!URGENT!!! plz help asap !!!

--------------------------------------------------------------------------------

hey every1

i need info and really quick...

im going to test drive an r32 gtr v-spec tomorrow after work

and i really need to know what the chassis code is to prove it is a v-spec

i can see it has brembo brakes.. the code ive taken from the car is

E- BNR 32-301887

KBNR32RBFS

not sure what that all is but yeh i need as much info and or tips on this as possible i would appreciate it heaps...

pls forward any info to my email.. [email protected]

thanx heaps..

Corey

Link to comment
https://www.sau.com.au/forums/topic/100787-urgent-plz-help-asap/
Share on other sites
Mr Italy! Proficient

Mr Italy!

Posted
Posted

I just did a quick search on Nissan FAST and nothing would come up when i put "EBNR32" in the software so i cut the E off and it found the car in question. It said nothing about V-Spec but what i did notice is that in one of the boxes it said GT-R1.7

So i searched an earlier number car ie "BNR32-010221" and in that same box only GT-R came up.

Just a wild guess but im thinking that 1.7 has to do with V-Spec.

I could be way off however...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan · Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan · Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...