Jump to content
SAU Community

Recommended Posts

hey guys.

my car (r33 gtst) isn't runing so good.

i swaped my stock AFM with a mates R33 (green lable, that works fine in his car) AFM, and it makes my car run like garbage, the car doesnt idle right, won't even go past 3k rpm in seccond gear. not good to drive at all

i cleaned my dirty AFM with eletrical contact cleaner, and now my car runs just like it did with my friends AFM.

whats the go?? i have 2 ecu's and they both dont like my friends AFM or my now cleaned AFM.

Link to comment
https://www.sau.com.au/forums/topic/100788-car-fussy-with-afm/
Share on other sites

How did your's run before you took out your afm to clean it?

It may not be the afm you know, you could have a significant vacuum/boost leak in your intake piping which will give similar symptoms. Seeing as 2 ecus's dont like it and you've tried 2 afms i'd say you've eliminated both ecu and afm problems.

yea theres severe leaks, before and after the engine, its not good at all... as i said car running bad.

bad = 3/10.... that was with a dirty stock afm, any ecu (both arnt stock, but close enough to it)

with my friends AFM or my now cleaned one, its running really bad 1/10.

i just don't know why the good AFM's don't like my car??

The old

2 bads = running bad

compred to

1 bad + 1 good = running really bad

Happens all the time, the answer is to fix the remaining bad.

In your case the leaks are making the engine run rich. Less air is actualy going into the engine, so the ECU is supplying too much fuel.

This is partially offset by the dirty AFM which sends lower voltage signals to the ECU. Hence the ECU injects less fuel than it would if the airflow was accurate.

When you put a good (clean) AFM on, the ECU sees the correct (higher) airlfow and injects more fuel. The result is even richer running than when you had a bad (dirty) AFM.

The answer.....simple ...... fix the leaks.

Hope that helps

:P cheers :P

Edited by Sydneykid

hehe yea i know... fixing leaks cost money :P, and i also need someone to do it, which would require me to drive my car for at least an hour to a decent mechanic, and im not sure if thats good for the health of my car.... as it just pours black smoke out of the back.

but you have answered my question for now... so thanks

cheers

my cooler piping is fine, it was the first thing i checked. cheers paul. or anything else that i could get my hands onto.

mr mafia, wtf. maybe you could send your grandmar over here so she can lift out my engine. see now that would be somewhat helpful.

hehe, you spend your time bitching about me. and then you say im whinging. goodone jono...

Edited by hijaked

"car fussy with AFM" doesn't equal lazy.

however being currently unemployed is. reason to why i don't have money, also reason why its taken so long for me to get car fixed.

i wish it were a simple pipe leak. but i beleive its a intake manifold gasket..

question was purely about the AFM and it was answerd. i have no intension to come out as a smartarse, you have been on SAU longer and you are also older, so i must respect that. sorry jono

ok, well, I'd check those manifold gasket leaks that you are talking about, and then maybe look at a stuffed FPR or maybe one of your injectors is stuck, or leaking.

So the car is blowing black smoke on idle? It will if it is fuelling too much.

the car pours out the smoke on idle, its black.

the only reason i say manifold gasket, is because i can hear a high pitched air leak sound right at the front of the plennum, i dunno if thats normal, but i couldnt hear it on my friends car.

im gonna send the car to mechanic sometime soon, ive had enough playing around with it.

hopefully it wont cost too much to have the gaskets replaced.

but im sure the dude will have a look aroudn and see what needs to be done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...