Jump to content
SAU Community

Recommended Posts

Here's my situation:

1. My car heats up, by driving

2. I turn off the car

3. I try to start it

4. Starter motor doesn't work (sounds like battery is dead)

Complicating factors:

1. If I jump start it when this happens, it starts perfectly

2. Starter motor works perfectly when cold

3. My battery is otherwise very healthy - can run everything else fine when engine not running.

So, anyone else experienced this? Or have any solutions?

My current theory is that a hot starter motor is harder to turn over than a cold one, and my current battery doesn't have enough oomph left in it to do this.

Thanks

Greg

Link to comment
https://www.sau.com.au/forums/topic/100838-starter-motor-troubles/
Share on other sites

More than likely it will be the battery. If it's old and on its way out, as it gets hotter while the car is running, bubbles will form on the inside of the battery electrodes and this will cause it to not have enough power to turn it over when it is hot. Also check the wiring is connected correctly to the starter, more importantly the ground wire

if your car doesnt start when its hot but all your car accesories function ie windows wind up and down, cd player works, then get a new starter motor cause its on its way out. i had these symptons, replaced mine and now it starts whether the weather is hot or cold.

Yeah this happened to me a few times, the last time it happened i was filling up at a servo and when i tried to take off the car wouldnt start!

To make matters worse no one was willing to jump start the car for me :rolleyes: I asked about 5 people, until finally guy in a V8 turned up and helped me out.

Well anyway the next day i got the battery replaced and its been fine ever since.

Yeah this happened to me a few times, the last time it happened i was filling up at a servo and when i tried to take off the car wouldnt start!

To make matters worse no one was willing to jump start the car for me :blink: I asked about 5 people, until finally guy in a V8 turned up and helped me out.

Well anyway the next day i got the battery replaced and its been fine ever since.

just clutch start it. jump start take too long and is too much hassle.

Yeah this happened to me a few times, the last time it happened i was filling up at a servo and when i tried to take off the car wouldnt start!

To make matters worse no one was willing to jump start the car for me :( I asked about 5 people, until finally guy in a V8 turned up and helped me out.

Well anyway the next day i got the battery replaced and its been fine ever since.

lol on saturday the exact same thing happened to me at a servo. ended up roll starting, although there was only just enough room. i've ordered a new battery through wrxhoon's group buy so hopefully that will solve it. if not, i'll get a new starter motor.

  • 2 weeks later...

Thanks for all the suggestions guys. I put in the battery I got through wrxhoon for $140 (equivalent to an Odyssey 1200). The engine cranks over much more quickky and I had no troubles starting the engine all weekend on a trip to phillip island, where the engine was probably the hottest it has ever been thanks to the 40+ degree temperatures.

Problem solved!

Edited by Greg

I've also just started having starter problems... R32 GTS4.

Battery is reasonably new ~ 6 months, and appears fully charged on the battery charger. But wont turn over at all. Roll starts and drives fine, but won't turn over.

Going to investigate the battery more tonight, otherwise the mechanic'll look at it tomorrow.

I'm hoping its a new battery : )

I've also just started having starter problems... R32 GTS4.

Battery is reasonably new ~ 6 months, and appears fully charged on the battery charger.  But wont turn over at all.  Roll starts and drives fine, but won't turn over.

Going to investigate the battery more tonight, otherwise the mechanic'll look at it tomorrow.

I'm hoping its a new battery : )

thats your starter motor. if you can roll start it but not able to start it standing still thats your problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...