Jump to content
SAU Community

Recommended Posts

Well heres a few pics of my car completed! Still have some cosmetics to do like tint, new seats, put my cage back in etc but essentially all the body is done! I decided to stick with the factory Diamond Black - to keep it pimp - and easy to repaint bumpers hehe. Here is some shots straight off the gun. Its certainly come along way from being what it was straight from J back in late 2004.

I whacked on the Final Konnexion body kit with M Sports 25mm Fenders. I rolled the rear guards out about 14mm and I think Im going to space my 18x9.5s out about 15mm and put some camber in. The skirts sit about 2 inches lower than the chassis rails hence my ride height is a bit more than Id like. Ive spaced out 18x8.5s upfront by 20mm upfront too to firstly clear the coilovers but also to fill the guards. I had to raise the car up about 12mm at the front because my tyres started eating fibreglass... but now I dont scrape the front bar at all... a good compromise!

I have attached a preview but the rest are at http://www.sido-takushi.com/paintnpanel/finalk

It cost me $2200 for the fibreglass... all genuine parts... $3k for Panel Beating (you'd understand why if you saw the car... but my pic above can give you a hint) and $3.5k for the paint job. Im fairly happy with it... but it sure did cost alot!

JK

post-11708-1136518903.jpg

Link to comment
https://www.sau.com.au/forums/topic/100884-the-cefiro-is-finally-konnexion/
Share on other sites

Yo Jai!

That looks sik! Well done dude - the long haul is finally rewarding. Motor plans?

Who did you bring in the FK kit through? I have FK skirts/rear bar on my 32 but unfortunately have damaged one of the skirts and am trying to bring in another?

Cheers,

Lyndon

Edited by Remix-

Thats really very very nice. Really not keen on big kits, but I think this is just so well done it looks good.

Ride hight is fine too. Awesome man. Well done.

Dark red leather interior would top it off hey :P

Very the fat... Good too see something other than uras. Who did you get the kit from? Might check what they have for laurels... as that seems a pretty good price :) Ride height looks ok.. You might start ripping of bits of glass if you go much lower

If ur still waiting for that Taxi click on my sig... They should be able to help ^_^

Um I got C-Red in WA to source it for me. www.c-red.com.au

I was told it was a genuine kit although it did take alot of man hours to make it fit up properly... so Im not sure... although I paid good money for it.

JK

Um I got C-Red in WA to source it for me. www.c-red.com.au

I was told it was a genuine kit although it did take alot of man hours to make it fit up properly... so Im not sure... although I paid good money for it.

JK

If it was a genuine then it should have had the final k stamp on the inside of the kit :(

Yeah all the body parts had the old school Final K logo stamped on fibreglass and layed under the top layer of glass... but it cost me $1k in labour to make it all fit... had to cut and tuck the bumpers as they were about 10mm too wide on each side!

JK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...