Jump to content
SAU Community

Recommended Posts

Hi all,

The coating on my wheels has been bubbling and flaking off in places since I've had the car.

It's kinda annoying me so I was wondering if anyone has advice:

1. Ignore and don't worry

2. Get them sand-blasted and powder-coated

3. Other options? Wheel repair/reconditioning places???

Option 2 is probably sensible but - wank factor aside - I'd like to retain the Nismo logos if I can...

If anyone knows of somewhere reliable in Brisbane to get this done, the advice would be appreciated, thanks! :rolleyes: Pics attached.

post-17890-1136648515.jpg

post-17890-1136648541.jpg

post-17890-1136648574.jpg

Link to comment
https://www.sau.com.au/forums/topic/101060-getting-wheels-re-coatedrepaired/
Share on other sites

I am relying on a 5 year memory but Chris Neil from Wheel Revolution.

Unit 2/18 Randall St Slacks Creek.

He's the man to see.

I second Chris as well. Yes he' still there and I've used him before. He's even got a write up in the current issue of HPI, go have a read. Depending on the damage repair work starts at around $40 per rim. He has the ability to bring your wheels up to brand new condition...if I had Nismo's I'd definately spend the $$.

Hi all,

The coating on my wheels has been bubbling and flaking off in places since I've had the car.

It's kinda annoying me so I was wondering if anyone has advice:

1.  Ignore and don't worry

2.  Get them sand-blasted and powder-coated

3.  Other options?  Wheel repair/reconditioning places???

Option 2 is probably sensible but - wank factor aside - I'd like to retain the Nismo logos if I can...

If anyone knows of somewhere reliable in Brisbane to get this done, the advice would be appreciated, thanks!  :mellow:  Pics attached.

I am relying on a 5 year memory but Chris Neil from Wheel Revolution.

Unit 2/18 Randall St Slacks Creek.

He's the man to see.

Hey jamac go with a wheel shop or panel beater, don't get the wheels powder coated just have them painted in enamel (sp?).

They will not build up the dust as quick & r a lot easyer to clean when in enamel...

Hey jamac go with a wheel shop or panel beater, don't get the wheels powder coated just have them painted in enamel (sp?).

They will not build up the dust as quick & r a lot easyer to clean when in enamel...

enamel your joking rite ?? :mellow: I wouldn't paint my dog kennel in it, thats if I had a dog kennel. 2pak or powder coat only

the guy at street art wheels up here at kunda park has been toying with a chrome finish for wheels for a few years now, not sure how he does it but he also does scratch and repair of mag wheels and repaints them in any colour u like. its called

"StreetArt Wheels,

1/ 33 Enterprise St Kunda Park QLD 4556

ph: (07) 5477 0240 Wheels & Rims--Automotive

Edited by 85URK

The HPI article only touched on rim repairing but overall they provide wheel restoration as well which includes painting. I had a set of Volks that had stone chips and gutter rash and all they did was restored it and repainted it in its original color...came out brand spanking new!

enamel your joking rite ??  :mellow:  I wouldn't paint my dog kennel in it, thats if I had a dog kennel. 2pak or powder coat only

lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust  build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

ever heard of a fullstop dude lmao! :mellow:

For machining, buckles, gutter rash etc: Dean at Depulu in Ashmore

For refinishing, painting and polishing: Dean at Mag Wheel Services in Southport.

I have personally used both these guys on more than one occasion and they are great at what they do. I absolutely swear by these guys!

I also take my wheels to Depulu for balancing, although they don't really do this as a service, they're the only place that seem to be able to get it right and are usually happy to do a balance only job. Also its noteworthy that these guys never use rattle guns.

-rb25

Edited by rb25
lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust  build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

2pak is not that much different from enamels price range because enamel is on its way out and going up in price.There lots of cheap 2pak out there thats better then enamel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...