Jump to content
SAU Community

Recommended Posts

  • Replies 717
  • Created
  • Last Reply

Top Posters In This Topic

yeah he got 265rwkw with nos, between 4000 and 4200 rpm he went from 120rwkw to 235 rwkw!!!! Near vert curve. Crazy.

Nah i didn't talk to ya, but saw u wandering round a few times. I wanna buy the top secret gtr :D

Then put a small projectile in the exhaust and watch it fly away into someone's windscreen as your taking off.

:/

1994 R32 GTR

76,000km

HKS 2530's @ 20psi

260 Poncams

= 301rwkw

I have a feeling the dyno was abit conservative but anyhow it was a great day (even though a touch hot).

post-1296-1142074549.jpg

Edited by benm

Just had a look at Stan's dyno graph - from the SATANIC. Very surprising to see that UAS backed off the run before it even ended... meant that peak power wasn't even reached??? The dyno graph just went vertically downwards at the end, power curve hadn't even started to dip yet.

Anyone else see this on their graphs or was it just Stan's?

Firstly a big thank you to Adam for putting this together. :/

Also to John and the staff at UAS for running the show.

Very happy with my boat, managed 261.3 rwkw @ 16psi.

Originally had boost set at 19psi,

but I wanted to know how she would go at a friendlier level. :D

Plenty of tough liners there today, some real good numbers.

So who's going to WSID?

1994 R32 GTR

76,000km

HKS 2530's @ 20psi

272 Poncams

= 301rwkw

I have a feeling the dyno was abit conservative but anyhow it was a great day (even though a touch hot).

Mate I had bit of a sticky beak at your GTR when it was waiting in line - all your odometer numbers line up nicely leading me to believe it is a genuine 76,000km? Nice :D

I'm *know* my odometer is a genuine 74,000km :D on the plus side I know for sure the boost restrictor is still in. :/ Comforting.

Just had a look at Stan's dyno graph - from the SATANIC. Very surprising to see that UAS backed off the run before it even ended... meant that peak power wasn't even reached??? The dyno graph just went vertically downwards at the end, power curve hadn't even started to dip yet.

Anyone else see this on their graphs or was it just Stan's?

If I recall his A/F ratios were running a little to lean to push it too much farther.. was a good run.. could have held on a little longer, got a video of it here.. I think the main issue with power was his boost dropping off 1psi..

anyways.. good day.. stuck round for a bit.. than left.. stupid whining gearbox.. shits me to tears now sounds like i'm running a dogbox or something..

Edited by Links
Firstly a big thank you to Adam for putting this together. :/

Also to John and the staff at UAS for running the show.

Very happy with my boat, managed 261.3 rwkw @ 16psi.

Originally had boost set at 19psi,

but I wanted to know how she would go at a friendlier level. :D

Plenty of tough liners there today, some real good numbers.

So who's going to WSID?

So who won STD turbo GTS-t......

also...who won overall and the reg.?

1994 R32 GTR

76,000km

HKS 2530's @ 20psi

272 Poncams

= 301rwkw

I have a feeling the dyno was abit conservative but anyhow it was a great day (even though a touch hot).

your poncams are 260...i fitted em.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...