Jump to content
SAU Community

Recommended Posts

  • Replies 717
  • Created
  • Last Reply

Top Posters In This Topic

I'm sure Abo bob will post the results for all catagories,

but Boosted Zed squeezed out 427 rwkw from his VG30DETT,

go the cardigan wearing, tea sippers . :/

Sorry Mona, got there after 1.00, had to work.

You had a little scare, 500+ ?

See you @ WSID

Just had a look at Stan's dyno graph - from the SATANIC. Very surprising to see that UAS backed off the run before it even ended... meant that peak power wasn't even reached??? The dyno graph just went vertically downwards at the end, power curve hadn't even started to dip yet.

Anyone else see this on their graphs or was it just Stan's?

If I recall his A/F ratios were running a little to lean to push it too much farther.. was a good run.. could have held on a little longer, got a video of it here.. I think the main issue with power was his boost dropping off 1psi..

anyways.. good day.. stuck round for a bit.. than left.. stupid whining gearbox.. shits me to tears now sounds like i'm running a dogbox or something..

you the guy with the white shirt and camera? LOL!!! any vids of my car?!?! :/

Did anyone happen to get a vid of my run?? If someone did i would like to get it. 177.1 with a stock computer wasnt bad, and the induction scream nearly gave me a hard on!!

Who had the RB20 GTS-t with STD turbo Stock ECU and heaps of powa....smoky or what??

you the guy with the white shirt and camera? LOL!!! any vids of my car?!?

sorry to dissapoint.. but wasn't me mona.. I was hiding away.. nah had a singlet on.. not sure who else was there with a camera..

top secret anyone..

post-19556-1142069921.jpg

nice turn out of cars..

post-19556-1142069961.jpgpost-19556-1142070138.jpg

Edited by Links

yer morgs made 365rwkws with 19psi. Top secret car was a little disapointing made 440rwkws i think but had a t88-38k and 25psi i think thought it would pull more then that.

And where was duncun with BBQ :/

:sorcerer: Brad

Yeah great day in my opinion... nice area, plenty of parking (even if it was a bit tight) and overall very well organized! Well done to Adam :D

Personally I was a bit disappointed at my own result, not so much the number of rwkw's generated but the fact that I was running 1psi off from the tuning 2 weeks ago @ HITMAN. Also, I'm still wondering why they backed off the throttle at that specific rpm - definitely wasn't rev-cut. On a good note, I got a torque graph out of it :D very torquey setup :/

However, just like last time - I've come home with new ambitions (oh my god here we go again)... we've re-routed the boost lines and we're now currently holding 13psi flat :) Dunno if it'll be stable, need to get it dynoed again soon or maybe I'll just wait for the Haltech.

Great chatting with old mates, new mates and most of all seeing the turnout to this event!

Mik made 371kw. Boost is typically 1.45 bar.

Thanks to Adam for organising and John for running. Also, thanks to Ben for finally listening to me and strapping it down... :/

Did STD turbo GTR make more than last years mark of 284 rwkw?

yeah he got 265rwkw with nos, between 4000 and 4200 rpm he went from 120rwkw to 235 rwkw!!!! Near vert curve. Crazy.

It only took that long as I asked Ben from UAS to ramp it slowly to 4400rpm then bury it :/ Not a great idea ramping from low rpm with nitrous on a dyno under load. Rods don't like it. lol

I was happy with the 190kW no gas - I hope anyone who watched the curve or saw the power vs. manifold pressure graph took note of the values. If there are any old pricks with something to say purely for the sake of saying something still talking i'd be surprised.

Thanks to Adam, Turbosmart and UAS for a great day.

Adrian

It only took that long as I asked Ben from UAS to ramp it slowly to 4400rpm then bury it :/ Not a great idea ramping from low rpm with nitrous on a dyno under load. Rods don't like it. lol

I was happy with the 190kW no gas - I hope anyone who watched the curve or saw the power vs. manifold pressure graph took note of the values. If there are any old pricks with something to say purely for the sake of saying something still talking i'd be surprised.

Thanks to Adam, Turbosmart and UAS for a great day.

Adrian

Im an old prick...but have noting but congrats to all the winners!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...