Jump to content
SAU Community

Recommended Posts

I am organising with Noltec atm to start a group buy of products for items they have available for Skylines. Items will be straight out of their catalogue for the R30 to R34 skyline

For specific details see here :

http://www.noltecsuspension.com/files/cata...20Catalogue.pdf

(pages 141 to 143 for Skyline components)

I havent received any info on pricing as yet, but the more people the better the group buy will be. I may look at becoming a distributor later if the group buy goes well....

What i need to know from people is what other items (from the catalogue) would you be interested in getting discounts on for you car?

Please look at their catalouge and see what you need, and let me know and i'll see about pricing asap.

Thanks.

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/103037-noltec-suspension/
Share on other sites

Definitely interested in the N82557 kit (adjustable castor bushes, R32 GT-R).

Also, might be interested in the following for the R30:

N44021 - Adjustable Strut Top

N51627 - Lower Control Arm inner bushes

N11217 - Steering Coupling

N11406 - Steering Idler bush

Ok guys ive got some pricing here (except the r30 stuff)

It seems they are prepared to offer their stuff at 20% off on 1 off items, or 40% off on 5 orders minimum.

Some items are expensive, while others are cheaper....

They basically have their own RRP which you take the discounts off.

Examples -

N32840 - Shock Absorber - Upper - Front bush kit ( 4 piece ).

RRP on this is $77.97

-20% = $62.38

-40% = $46.78 (5 orders needed)

N82557 kit (adjustable castor bushes, R32 GT-R).RRP on this is $301.72

-20% = $241.38

-40% = $181.03 (5 orders needed)

PN N52088 Upper control arm assembly (camber adj.)

RRP on this is $691.43

-20% = $553.14

-40% = $414.86 (5 orders needed)

Rear subframe bushes N2447 (incl crush tubes)

RRP on this is $266.20

-20% = $212

-40% = $159.72(5 orders needed)

These are only a rough guide, and prices may come down. As an example the subframe bushes i was quoted $206 for a 1 off item ($6 cheaper) than going by their catalogue.

Let me know what u think of the prices, as i havent added anything to it, im just doing this to help others out. It seems a group buy may be necessary to get the pricing down to where we may all like it.

Edited by Bl4cK32

No worries guys, like i said i can get it cheaper but we need a few orders, so talk to everyone u know who may need some stuff.

im doing this to help us all out - no adding extra $$ for myself.

Check out the catalogue and let me know what else u may want.

Subframe mount N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Edited by Bl4cK32
Subframe mount  N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Count me in for the complete rear subframe mount

Sure no probs. Im holding off till we get a few people who all want the same items.

If someone orders something though, and i dont think im gunna get any more orders, i'll just put it straight through and they can get the 20% off. Would be nice to get the 40% on all items, but some items are more expensive than others, and not everyone wants the same things.

Might speed things up for those who want the items straight away too i spose, instead of waiting till i get 5 ...otherwise id just put say a 3 or 4 (?) week wait, after starting the group buy, before i put an order in on a spcific item.

It might help if people let me know too when they need the items, as they order. It'll be good to know with when to put the orders in etc...

Interested in..

1x Sway bar - link F 8 -- N21169

1x Sway bar - mount 20mm 2 -- N21063

Thats if the link kit would suit R32 GTS-T front? .. it says 8 bushes.. does that mean it would be enough for front and rear?

Timeframe would be 3-4 weeks (no rush).

ok, Predator - as for your first question about N32840 - whats the shock absorber upper. Andrew from Noltec confirmed that "N32840 is a shock absorber bush not a strut mount"

1x Sway bar - link F 8 -- N21169

RRP is $24.49

20% - $19.60

It would be for both gtr/gtst and it says for the rear only (dont know how many bushes are in the rear?) 8 bushes per kit, and only 1 kit required per vehicle. if you would like, i can confirm as well about this before ordering.

1x Sway bar - mount 20mm 2 -- N21063

Funny enough its not on my parts price list, i'll have to get back to you on that one, but the same part for the r33 is about $22 (~$17.60 with 20% off)

I also now have prices for R30 skylines :D

N44021 - Adjustable Strut Top - Need to confirm on ordering

N51627 - Lower Control Arm inner bushes - RRP $58.43 ($46.75 with 20% off)

N11217 - Steering Coupling - RRP $54.27 ($43.45 with 20% off)

N11406 - Steering Idler bush - RRP $16.97 ($13.60 with 20% off)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...