Jump to content
SAU Community

Recommended Posts

I am organising with Noltec atm to start a group buy of products for items they have available for Skylines. Items will be straight out of their catalogue for the R30 to R34 skyline

For specific details see here :

http://www.noltecsuspension.com/files/cata...20Catalogue.pdf

(pages 141 to 143 for Skyline components)

I havent received any info on pricing as yet, but the more people the better the group buy will be. I may look at becoming a distributor later if the group buy goes well....

What i need to know from people is what other items (from the catalogue) would you be interested in getting discounts on for you car?

Please look at their catalouge and see what you need, and let me know and i'll see about pricing asap.

Thanks.

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/103037-noltec-suspension/
Share on other sites

Definitely interested in the N82557 kit (adjustable castor bushes, R32 GT-R).

Also, might be interested in the following for the R30:

N44021 - Adjustable Strut Top

N51627 - Lower Control Arm inner bushes

N11217 - Steering Coupling

N11406 - Steering Idler bush

Ok guys ive got some pricing here (except the r30 stuff)

It seems they are prepared to offer their stuff at 20% off on 1 off items, or 40% off on 5 orders minimum.

Some items are expensive, while others are cheaper....

They basically have their own RRP which you take the discounts off.

Examples -

N32840 - Shock Absorber - Upper - Front bush kit ( 4 piece ).

RRP on this is $77.97

-20% = $62.38

-40% = $46.78 (5 orders needed)

N82557 kit (adjustable castor bushes, R32 GT-R).RRP on this is $301.72

-20% = $241.38

-40% = $181.03 (5 orders needed)

PN N52088 Upper control arm assembly (camber adj.)

RRP on this is $691.43

-20% = $553.14

-40% = $414.86 (5 orders needed)

Rear subframe bushes N2447 (incl crush tubes)

RRP on this is $266.20

-20% = $212

-40% = $159.72(5 orders needed)

These are only a rough guide, and prices may come down. As an example the subframe bushes i was quoted $206 for a 1 off item ($6 cheaper) than going by their catalogue.

Let me know what u think of the prices, as i havent added anything to it, im just doing this to help others out. It seems a group buy may be necessary to get the pricing down to where we may all like it.

Edited by Bl4cK32

No worries guys, like i said i can get it cheaper but we need a few orders, so talk to everyone u know who may need some stuff.

im doing this to help us all out - no adding extra $$ for myself.

Check out the catalogue and let me know what else u may want.

Subframe mount N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Edited by Bl4cK32
Subframe mount  N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Count me in for the complete rear subframe mount

Sure no probs. Im holding off till we get a few people who all want the same items.

If someone orders something though, and i dont think im gunna get any more orders, i'll just put it straight through and they can get the 20% off. Would be nice to get the 40% on all items, but some items are more expensive than others, and not everyone wants the same things.

Might speed things up for those who want the items straight away too i spose, instead of waiting till i get 5 ...otherwise id just put say a 3 or 4 (?) week wait, after starting the group buy, before i put an order in on a spcific item.

It might help if people let me know too when they need the items, as they order. It'll be good to know with when to put the orders in etc...

Interested in..

1x Sway bar - link F 8 -- N21169

1x Sway bar - mount 20mm 2 -- N21063

Thats if the link kit would suit R32 GTS-T front? .. it says 8 bushes.. does that mean it would be enough for front and rear?

Timeframe would be 3-4 weeks (no rush).

ok, Predator - as for your first question about N32840 - whats the shock absorber upper. Andrew from Noltec confirmed that "N32840 is a shock absorber bush not a strut mount"

1x Sway bar - link F 8 -- N21169

RRP is $24.49

20% - $19.60

It would be for both gtr/gtst and it says for the rear only (dont know how many bushes are in the rear?) 8 bushes per kit, and only 1 kit required per vehicle. if you would like, i can confirm as well about this before ordering.

1x Sway bar - mount 20mm 2 -- N21063

Funny enough its not on my parts price list, i'll have to get back to you on that one, but the same part for the r33 is about $22 (~$17.60 with 20% off)

I also now have prices for R30 skylines :D

N44021 - Adjustable Strut Top - Need to confirm on ordering

N51627 - Lower Control Arm inner bushes - RRP $58.43 ($46.75 with 20% off)

N11217 - Steering Coupling - RRP $54.27 ($43.45 with 20% off)

N11406 - Steering Idler bush - RRP $16.97 ($13.60 with 20% off)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...