Jump to content
SAU Community

Dump And Front Pipe

Mick

By Mick,
in Engines & Forced Induction

 Share

Recommended Posts

B0oStEr Mentor

B0oStEr

Posted
Posted

I just bought an all in one split dump/frontpipe.

The all in one design allows the wastegate pipe to be much longer than the HKS style split dump and separate frontpipe combo.

This is supposed to reduce turbulence therefore improving the flow.

Some say that the all in one bellmouth type can make more power in the top end than either of the split types when running high boost but not everyone agrees with this.

Do a search and make up your own mind.

5LEEPER Collaborator

5LEEPER

Posted
Posted

i was origianally going to go for a split style one... from marky at Exhaust technology (SA)

However he informed me that with the stock O2 sensor, they apparently have 3 prongs or somethin like that, and one of those sensors registers the heat expelled out of the turbo/wastegate.

now if your on full boost for a while (ie long hills thrash) then the air coming out of the wastegate pipe is much hotter than waht the O2 sensor (in the front pipe still) is reading.

Dont know exactly how this effects the computer etc of a stockish car..... but marky informed me to simply go for a bellmouth design.

Mick Mentor

Mick

Posted
  • Author
Posted

yer the one in looking at is an all in one screamer and front pipe, so its like a normal front and dump all in one pipe but the seperate wastegate pipe doesnt join back into the exhaust. So what do you guys think ..

nsta Mentor

nsta

Posted
Posted (edited)

Hey im getting a split dump very soon, a stainless steel one that goes from turbo to front pipe.

How is the factory unit restrictive???they look very similar in the pic above apart from the SPLIT design, is it just its flow capabilities of the stock one???

And i assume youll see the same amount of gains from going front/dump combo, or just the dump pipe unit itself with an aftermarket front pipe???

is it a good idea to have the split dump heatwrapped first?and how much wrap will i need?

Edited by nsta
  • 1 month later...
gt-t_r34 Mentor

gt-t_r34

Posted
Posted

i was all in on getting one of the batmbl ones but after showing my friends they all say to get the greddy split dump and blitz front pipe because suposedly where the front and dump join has alot of stress and they crack easily there with the 2 in 1 designs,

and its actually happened on my mates s15 he had a 2 in 1 design and it cracked right where the dump and front would usally joing now he has the greddy & blitz combo!

around the same price as batmbls too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • Milkmun
      R33 suspension bushes replacement, what wears the most?

      By Milkmun · Posted

      As above, replace as many as you can afford. If anything, due to old age.
    • Dose Pipe Sutututu
      Oil Control In Rb's For Circuit Drag Or Drift

      By Dose Pipe Sutututu · Posted

      Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
    • MBS206
      Oil Control In Rb's For Circuit Drag Or Drift

      By MBS206 · Posted

      It definitely seems like you have no beef, with only digging up a 5 year old post, to comment on an inflammatory item with total insensitivity, and of which had nothing to do with the thread.  Yep, you definitely seem like a great person and your friends and family would be so proud to know of your lovely actions
    • Shizu
      Returning after a long time!

      By Shizu · Posted

      Thanks buddy, so happy to be back! Managed to pickup a Unicorn R34 completely stock and clean. Looking forward to adding some goodies to it and posting one here. I'm shocked that so many forums stopped. If you could find my old profile - I'd love that if its possible. My old account was JET200GT. My email might need to be fixed too. To use this one. I think it was the same though..
×
×
  • Create New...