Jump to content
SAU Community

Recommended Posts

hey guys, i get this yellow stain on back of my line that u talk of, comes off fairly easy with turtle wax, any way i bought the car about 6 months ago, the seller never mentioned anything about no cat. Just wondering wats the easiest way to tell if its been fiddled with? cheers.

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Finally after a day searching here I found what I was looking for. The guttered cat question. I have the factory exhaust on my GTSt and it has enough Kms on it to safely say the cat doesn't do anything usefull anymore. It's high time I replaced the lot with something more 3" ish. I am travelling OS soon so won't be shelling out money yet. Was keen on bashing out the guts of the cat in the meantime for some more hp and better milage. Not too concerned about RTA/EPA/COPS (Although the TRA did pay a "routine" visit a little while ago..), my car doesn't draw attention like some others. $10k is worst case senario and they really have it in for you. I know someone at the EPA and they like targeting repeat offenders more. My question is: are they easy to bash the guts out of? Much steel and other bits that will make this operation a problem?

must be lucky with mine, i have a hi flow cat which is gutted and no resonator or anythin, only have a straight thru rear muffler, cars well tuned and i dont get much smoke if any ahtough i get flames at hi rpm back offs and shifting up, pretty nice, felt a bit more free once the cat was gutted cant remember exactly thought the full gain, roughly 10rwhp i think maybe bit more, it went from 472rwhp to 485rwhp. and from under neath just looks like a normal cat

ben...

Guys that whole not having a cat = $10,000 fine is a load of crap.

When i bought my 32 and didn't know too much i got defected and had to take it to Regency.......

So the car is on the hoist and the inspector goes "see that"?

i say "see what"?

"exactly" he replies "there should be a cat there"

Just said i will need one to pass, and that was it, nothing else was said!

No mention of a fine no nothing.

PS. I love having no cat!

Edited by MADGT4
Guys that whole not having a cat = $10,000 fine is a load of crap.

Agreed. I think you might be the best case scenario, differnt states differ of course but still good news.

I will speak to my EPA friend in NSW and give you guys "from the horses mouth" facts on what usually happens in this regard.

As for my cat, I'll take to it with a hammer and pipe in the meantime until I replace the whole exhaust system. I will get a high flow cat no doubt, I beleive they work well. Not sure on dump/cat/muff combo yet, have to surf around and get some advice of you guys. Mild steel likely, I don't think I'll have it long enough to warrant SSteel.

when i bought my car it didnt have a cat. not a cat with a pipe thru it, just a pipe. i havent bothered changing it, if a cop says wheres the cat, i'll just say what's a cat. Surely they can't give me a fine if i bought it like that and say i don't know what one is??? can they??

when i bought my car it didnt have a cat. not a cat with a pipe thru it, just a pipe. i havent bothered changing it, if a cop says wheres the cat, i'll just say what's a cat. Surely they can't give me a fine if i bought it like that and say i don't know what one is??? can they??

speaking of punchin cats.. i planned to do mine tomorrow. 90kms on a GTR runnign rich just clogs it up.. :lol: turbo cars will clog cats up in a matter of years.. if u can afford a cat buy it.. the straight out emissions produced by an engine is extremly harmful..

hehe ..

Cop: defect time.. ok son whats that hanging off the block?

" i dnt knw wat it is ?"

Cop: looks like a T4 T70 and external wastegate?

"what u talkin bout thats standard.." ;)

CAT CONVERTERS SAVE LIVES.. :D

Guest Mashrock
Guys that whole not having a cat = $10,000 fine is a load of crap.

When i bought my 32 and didn't know too much i got defected and had to take it to Regency.......

So the car is on the hoist and the inspector goes "see that"?

i say "see what"?

"exactly" he replies "there should be a cat there"

Just said i will need one to pass, and that was it, nothing else was said!

No mention of a fine no nothing.

PS. I love having no cat!

haha likewise with me,

still hasnt had a cat on it. but there are like 3 massive mufflers under there so it isnt really a loud car to begin with so i doubt the exhaust will ever be checked.

p.s. loves having a high flow veilside exhaust.

Why no cat anyway??

what sort of mods/horsepower you got

Mine went 354awkw with cat (3.5in metal cat)and 361awkw without cat

So for 7kw (in a 350awkw car) who cares just put it in

tho also going to get west side put one of them 3.5 inch metal cats on.. just incase.. then for the track its nothing but a small sidepipe for maxium noise and flow

speaking of punchin cats.. i planned to do mine tomorrow. 90kms on a GTR runnign rich just clogs it up.. :lol: turbo cars will clog cats up in a matter of years.. if u can afford a cat buy it.. the straight out emissions produced by an engine is extremly harmful..

We considering a cat should be replaced every 40,000Km (don't quote me) do a quick calc on how many cars are running with cats that don't work? Let just say a few. How about bikes? Not too many cats on them nowdays, I can tell you mine doesn't have one nor does it require one. Not to mention leaded cars running PULP and fuel additives...hmmm can you smell the roses? I don't feel bad about it, I drive the car twice a week.

I will get a high flow cat anyway guys, no need to talk me into it. I'll try find a good value split dump pipe, high flow cat and a reasonable sized muffler (no cannons please) with some 3" to join the dots. Local exhaust place quoted me $1000 for his half baked system - no thanks. Any recommended exhaust place who will listen to what I want and not rip me? Someone said Liverpool Exhaust (NSW)... hard to tell if you guys recommend people/shops or put in a good word for your cousin's business...

News on the $10,000 question on the way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...