Jump to content
SAU Community

Recommended Posts

Assuming you have an auto, it would change the shift points. Power would raise the RPM at which it changes up (and down probably), and the snow setting usually means your car will take off in second to avoid wheelspin.

ah cool thanks for the reply guys,

so the button is a bit like the econ buttons on the ford falcons, where you can turn it on to stop it from holding onto the gear for too long, hence increases fuel economy,

while the power button is the reverse, it will allow you to get more power out of the engine,

currently i noticed if you plant your foot down, the engine still revs to 7k, what will be different if power is switched on?

In power it kicks down a lot easier, and is more reluctant to change up. Also seems to launch better, dont know if im imagining it but.

Driving in power mode is much more fun when you want to fang, the car feels sluggish in normal and snow modes. Snow is good for saving fuel but!

The enging will rev the same in any mode.

snow mode takes of in 2nd gear ....auto stays standard gearing and power holds peak rpm longer so it picks up speed quicker .

btw my power button lights up orange , is the snow meant to light up blue or is my bulb in it dead ????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...