Jump to content
SAU Community

Recommended Posts

Ok i have spent about 3 hours searching through the forum but can't find what i am looking for..

Could you guys recommend me a good clutch..i had my eyes on an exedy heavy duty but was told by a machanic that they don't last long about 12 months max. he recommended extreme but they are like $300 extra..

What i want is a clutch that last me the longest because it is a bit of a pain replacing them all the time..

what you guys think is a good clutch that last but not to difficult to drive?

thanks in advance..

ps. i got a GTST -II and in melbourne..

Link to comment
https://www.sau.com.au/forums/topic/106603-what-clutch-do-you-guys-recommend/
Share on other sites

If you read what he was saying, you'd see he didn't want to spend $300 more on the xtreme.. so of course he would want a jim berry ;)

Well unfortunately if you're on a budget, your options are a little more limited.

There is an Xtreme full face organic for around $350.. which would do probably do the trick. Best to speak to Xtreme Sales, to ask what you might need and they will put you in touch with a local distributor who can give you a price :D

Thanks guys..

i knew about the Jim Berry but he's in qld.. and i m in vic..

i rather pay abit extra for something that last longer..and still drivable in city traffic.

i am willing to pay up to $1000 (fitted) for the thing .. any particular model you can recommend?

Thanks guys..

i knew about the Jim Berry but he's in qld.. and i m in vic..

We do have couriers and AusPost these days :D Seriously, that's how I got my clutch to Jim. Was about $30 through Express Post.

If you're willing to pay up to $1000, I would get the Jim Berry "Stage One". Its about $700, and fitting will probably be another $300.

i am willing to pay up to $1000 (fitted) for the thing .. any particular model you can recommend?

God damn. Exedy cheaper than exedy? That's news to me. For $1000 you can have an xtreme clutch. They're like $400!!

I have a 9puk cerametalic whatever with 860kg pressure plate. Pulling 200rwkw, goes fine, would buy one again.

Ok i have spent about 3 hours searching through the forum but can't find what i am looking for..

Could you guys recommend me a good clutch..i had my eyes on an exedy heavy duty but was told by a machanic that they don't last long about 12 months max. he recommended extreme but they are like $300 extra..

What i want is a clutch that last me the longest because it is a bit of a pain replacing them all the time..

what you guys think is a good clutch that last but not to difficult to drive?

thanks in advance..

ps. i got a GTST -II and in melbourne..

This is only my opinion on how to choose a clutch but I think it works really well. Once you've figured out what you want / need in a clutch, then pay a "decent" amount of money and get a "decent" clutch that meets your needs ( even if that means not getting those 24" chrome wheels for another 2 months :O ). If you buy the CORRECT clutch, you will enjoy driving your car more, the clutch will last longer causing less headaches in the long run and you won't risk causing damage to your car ( killing the pedal box welds, master cylinder or slave cylinder or killing the gearbox itself ).

Honestly answer questions like..........

- What power do I want it to handle ?

- Where do I do most of my driving ? ( Cruising, Commuting, Drag Racing etc. )

- What is my driving style ? ( Smooth, Agressive, Both etc. )

- What kind of pedal feel do I want ? ( Heavy Button Style, Progressive/Stockish, Progressive/Heavy etc. )

- What CAN I honestly afford ? ( 24" rims scenario )

Once you know what you need, find out what's available that meets your needs ( heaps of guys on here can recommend something that fits your needs once you are specific about what you want ) and then buy it. Do this instead of saying "I've got $500 to spend on a clutch. What's the best I can get ?" and you'll be a lot happier in the long run.

:end rant: :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...