Jump to content
SAU Community

Recommended Posts

Recently had a short circuit (sub box connections loosened>touched>blew a head unit connections making it go pop badly on powerup).

:) Anyway, that's fixed, but the auto-elec said my battery might be gone cos while working on it with the key in the accessory postion and engine off, it died after about 10-15 minutes. They said it should last a coupla hours at least if the stereo isn't on. Annoyingly, they didn't say "you need a new battery" or "we should check the rest of the system for grounding" etc... u know what I mean? Couldn't give me a straight answer ;)

So now I'm worried cos I'm about to get my stereo upgraded and if the car's struggling to hold charge 10 minutes then I want to fix that first. I already jump out of the car and lock it real quick out of paranoia :D

So I'm gonna check the battery manufacture date. How can I tell how long it is into it's life? I read some batteries last 2 years, some 4.

If the battery isn't long in the tooth, I'm gonna check what the nominal amp being drawn from the battery is while I'm parked. I read it's supposed 50mA (plus whatever the boot light draws if on). Is that correct? Roughly same for all cars? Mine's a '96 R33 GTST.

Also, the auto-elec said I need a "sealed" battery. That's what's in there at the moment. Somewhere else said that's a load of hooey. What does everyone else have? The battery in there at the moment looks a lot smaller than the seat/frame it's sitting in. I think there's meant to be a larger battery there... After checking there's no crazy draw on the system while off (and fixing that if there is), if I need a new battery, what's the biggest/longest lasting one that will fit in an R33 2 dour?

BTW, the audio system isn't anything crazy, so don't think I need a second battery etc. It's a 700W rms 4 channel amp, off a JVC head unit with focal splits and a 10" sub.

you answered most of all your own questions there buddy . the autoelec should of told you so you stop guessing your self . if its been in front of an AE then he could tell in 1 second if the battery or Alternator is fragged .... it is!!!, i can tell by what your saying ... replace it and forget about it hassling you ......i went the biggest fatest exide that would fit and repaced terminals with contact luggs ... not a hicup now !!!

mine was the same, came with jap battery .... there ok until you slowly drain the old one of power somehow (bootlight stereo etc) and they seem to cross a cell making it a 12 volt battery still but no staying power .....

lol jap batteries are crap thats all there is to it. if you wanna run subs n all that shit off your car with a jap battery and dont expect it to go flat after having it on accessorices for extended periods of time.... your dreamin

ishh: The auto electrician I dealt with when picking up the car was some mongrel obviously in a big rush (for *#& knows what reason, it wasn't lunch or the end of the day), and he barely spoke a word of english, hence me walking away without a clear answer simply cos I couldn't understand him and noone else was around.

JaR: Who said anything about a jap battery? From memory I don't think it is jap. And I said I jump out of the car real quick... obviously I'm NOT sitting in the car park with the shit running and the engine off.

Thanks so much for the genuine non-sarcastic help...

1. most cars have batteries that are really old. Why not replace it if it's 5 years old?

2. batteries are cheap. head to our group buy section and pay 140 for the sealed battery from wrxhoon and be done with it. You won't have to worry about battery again.

3. stop stressing, it's only a battery. it's only 140.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...