Jump to content
SAU Community

Intercooler With Inlet And Outlet On Same Side

Johnny Cash

By Johnny Cash,
in Engines & Forced Induction

 Share

Recommended Posts

Johnny Cash Experienced

Johnny Cash

Posted
Posted

Hey fellas,

Just tapping into your brains again for some intercooler advice.

I've noticed most of the hybrid and copy kits have the pipe on the right hand side that goes half way over the engine and into the inlet manifold.

I was just wondering if an intercooler with inlet and outlet on the same side would be better on a GTS-T, as it would involve a lot less piping. Would theoretically have two benefits - less pipe (less lag), and no piping going over the engine (as opposed to traditional intercoolers with inlet and outlet on opposing sides).

Obviously on GT-Rs, you're better off with the traditional style cooler, but I figured with a GTS-T it would be a different story.

There's one on eBay that caught my attention:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMEWA%3AIT&rd=1

I'm thinking that's the way to go, but want your opinions.

Thanks again,

J.R.

Busky2k Veteran

Busky2k

Posted
Posted

My bet it would be pretty restrictive despite their claims, and the cold outlet is right next to the hot inlet (and same goes for the core) so I'd be questioning its cooling efficacy. So just go with the tried and tested in/out on opposite ends..

BHDave Grand Master

BHDave

Posted
Posted

the end tank design on the far end doesn't look the best for flow and the top pipe will end up pointing straight at the mount for your front bar reo.

I noticed they had an apexi looking core with a crossove type outlet which would be considerably better flowing but the down side is that you end up with 2 feet of extra piping compared to the regular across the top of the radiator method.

RANDY Veteran

RANDY

Posted
Posted

There is some HKS cooler that uses your existing piping-holes on the right-hand side. The cooler comes with the rest of the piping, which includes a 180 degree turn. The return outlet on the left of the cooler turns around and travels below the core, back to the factory holes for piping.

The bend isn't terribly nice to have, but you don't need to hack your left-hand side to run pipes in and over your fan, and the cooler forces the air to travel the whole intercooler.

SKY 34 Mentor

SKY 34

Posted
Posted (edited)
My bet it would be pretty restrictive despite their claims, and the cold outlet is right next to the hot inlet (and same goes for the core) so I'd be questioning its cooling efficacy. So just go with the tried and tested in/out on opposite ends..

I agree with the cooling efficiency bit...I dun think it'll work as well at all....dunno if this is right..but..

I'm thinking if air were to enter from the bottom pipe (hot air rises?), it does not necessarily travel to the other end of the intercooler to get cooled and back again to go out from the top pipe...the air can just flow straigh from inlet up to the outlet...

Edited by SKY 34
Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

Yeah, I think you're right SKY34, will have to go a conventional intercooler.

But I'm just wondering if the extra cooling you get from running a 'normal' ic is combatted by the ic pipe that has to run all the way over and around the engine to go to the intake manifold...

Just a thought.

hey Michael, can you send me the link for that?

How much, and who do I pay?

Kaido_RR Grand Master

Kaido_RR

Posted
Posted

here is the link: http://page6.auctions.yahoo.co.jp/jp/auction/f42804965

best bet is to contact- SAU Trader Slidewize Imports (as Zac buy stuff off yahooauction)

at the current price its 22,000yen (about $260 + shipping and other fees)

silva33 Mentor

silva33

Posted
Posted

I have a trust cooler as pictured above and highly recommend them! I am making decent power 244rwkw and the cooler is not a restriction at all... they are not as big as the hybrid coolers but it all comes down to how much power you want to make...

The best thing about it is that the engine bay looks stock...

Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

Thanks mate, will do.

Lovin that cooler, says its for R31 RB20DET? Should that make a difference?

Either way, if I can get it to my door for around 300, it would definitely be worth it.

Even tho I'm broke :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...