Jump to content
SAU Community

Recommended Posts

Does anyone know if the washer looking thing inside one of the hoses that goes to the intercooler piping from the wastegate that has a red line marked on it is a boost restrictor thingo or does it help to increase boost etc.

figure that out and then get back to me

RiaZ

Link to comment
https://www.sau.com.au/forums/topic/10730-boost-restrictor-thingo/
Share on other sites

well i was talking to gav with an r32 gtr and he said it did increase but he was also saying on the s platform s13, 14, 15 you need to put a bigger restriction in to get higher boost.

so cos i dont have a boost guage i am using the factory r33 one, yeah i know its shocking well it has a 0 and a +7 marked and when i took the restriction out it climbed to the mark that is between those two so basically 3.5 but when i put the thing back in it went to between the 3.5 and the 7. now it seems obvious that it is producing more boost but the seat of the pants story is different. the car doesnt seem to have that 2 stage factory boost like normal it just gets to the 3.5 and sits there rock steady

someone enlighten me

I can check again when i get a boost guage but if someone has a guage how about you go out right now and pull that thing outta there and come back and let me know

RiaZ

the bleed valve install is a 'no-brainer' (that's why I could do it).

It plumbs staight in with no fuss. Adjust it slowly a notch at a time and give it a bootfull on the freeway in 4th. In fact the freeway is a great place to do the tune. There is no need to exceed the limit as the turbo under load in 4th will get to max boost well before you break the law.

leave it at 10psi and I'm sure you will be more pleased.

what are you guys talking about now.... what is the deal with the restrictor thingo, cmon,

i got a bleed , forget me installing it. I wanna find out if the restrictor is better not there or if it is not a restrictor as such??

something like that

oh and yes the bleed will be going in shortly. i wanna get the dump pipe sorted first and the boost gauge

"not very good with non-stock turbo's though"

id have to disagree there paul. i run a bleeder on my turbo and its flawless. holds 15psi no worries. no spiking and builds smoothly, couldnt ask for anything else. from my experience with a GFB bleed valve theres much better things to spend money on then an EBC (which are quite pricey)

i understand u dont see the top secret supra getting around with a turbosmart bleed valve but for most of our cars bleed valves are decent

Most other people experience spiking with there bleed valves, they aren't designed to compensate for the change in boost levels like an EBC, but some people like them. I used one for a while, didn't like it, but that's my situation.

Non-stock turbo's tend to produce alot more airflow, and the bleed valve doesn't react too well.

See'ya:burnout:

Yeah, external wastegates are a major improvement for proper control. I will have one oneday, but until then I'll keep my EBC, it works nicely, plus has the advantage of being able to change boost in cabin, but agreed they are too expensive.

See'ya:burnout:

bleeder are a poor mans EBC and don't do anywhere near as good a job bringing the boost on quick or holding boost.

If you have the money an ebc is great stock turbo or not. If I had one my times over the quarter would be a tenth or two lower just from the extra response they offer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...