Jump to content
SAU Community

Recommended Posts

It works!

okbi8h.jpg

Thanks for the compliments guys. 4 doors are becomming more common but there's still not too many about.

This'll do for now. You can still click on the things in the first post to get the rest.

okbihz.jpg

ps - thanks ignuz.

Troy that story does not get published on the forums.

The mechanic who took it for the pink slip test drive bottomed it out but I don't. I raised the cooler while the car was out of action so it went up an inch and the car came down an inch.

I modified the front bar a little with help from 666dan.

My rims are cheap and nasty but I would love some nice black 18's. (maybe like these ones http://www.skylinesaustralia.com/forums/in...owtopic=106464) or better still some nismo lmgt4 or whatever they are called - I'm not very good with the names. Just don't have the cash atm.

It works!

okbi8h.jpg

Thanks for the compliments guys. 4 doors are becomming more common but there's still not too many about.

This'll do for now. You can still click on the things in the first post to get the rest.

okbihz.jpg

ps - thanks ignuz.

4 doors are very common. They can be had on jspec or prestige for 15k+. People are taking them up instead of r33s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...