Jump to content
SAU Community

Recommended Posts

just a quick question here why are u losing it for a year??? i got caught doing 44km over the limit back in july last year and i copped it for only 3 months!!!! plus 3 months for demerit points used up.... to my understanding its 45km and over is 6 months on the spot.... 30-44km over is 3 months this is interesting id go to court and debate the suspension period...

Edited by mass_iv
  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

I used the same excuse that speedo was not working... even got dressed up in suit to impress the judge, supplied references etc etc but unfortunately not only did I have to pay the fine... I lost my license, paid a fine and paid court costs for wasting court time. Let me tell you the judge was not impressed and said "speedometer should have been fixed before vehicle was to be driven on the road ... defective vehicle"

Well thanks to the people who had something constructive to say. As for the rest, i dont give a sh1t and have a good life.

;) Only just read this, and that's exactly the comment I would expect from someone like you who posts one hell of a lack of driving ability & knowledge on a public, Australia-wide read forum. Nice work.

Here is some constructive feedback

Are you in Victoria? If so, than anything over 30km/hr is a mandatory 12months licence loss, regardless of judge.

One thing that might help is to tell judge (if it isnt on the coppers report) that you didnt know speedo was busted and only found out after you received the fine, and have since booked it in to get it fixed. Get a report etc and you might have a chance of getting away. There is a chance that even with the speedo issue, you will still lose your licence for a year due to the mandatory penalty. I lost my licence for a year and judge said she couldnt do anything about the licence, but she did significantly lower my fine.

Good luck!

And the rest of you, lay off him. Losing his licence for a year will be plenty of punishment as it is. Get off you high horses and get fu(ked.

You have every right to go to court & argue your case; so use you right!

Get the fine, contest it, go to court, and swear the truth - let the judge decide whats reasonable & whats not.

thats awesome, and not only loose the case, but also get a canery on the car because of the faulty speedometer, :/, its the owners/drivers responsibilty to make sure its working correctly and to fix it immediatly

it would be like

cop pulls u over for have no rear brake lights

oh thanks officer i didnt know they were out

cop ... yeah no worries here is ur fine

i'd go fix them now

etc ...

hehe

the car in its current state is in fact unroadworthy.

I find it hard to believe people are taking the high ground on this. I dont know anyone who hasnt sped a fair way over the speed limit at some point, and im talking about normal cars like camry's, pulsars, commo's etc

I took a round trip to canberra today (from sydney). Average speed of all the cars 120km/h. The speed limit is 110. Point is, everyone speeds at some stage. It wasnt like he was in a school zone doing 90...he was on joining a freeway...

That said, youve goto be idiotic if you couldnt tell how fast you were going. At 141km, your at least 3.5-4k rpm in 5th gear. Skylines dont cruise comfortably at that speed. Theres too much air resistance so you have to be constantly boosting to maintain that speed.

You should cop the fine and whatever time they give you since theres no way you could not have known that you werent speeding (i dont care if you speed, just suck it in when you do get caught and dont try to weasel yourself out of it)

I live in Canada, so i don't know your laws but, i think that there is a legitimate case here, well there is atleast a case in Canada. if you were merging then there is no cars beside you. If you were caught just as you enter the freeway then how would you know that you were going that fast. man i have had my car up to 150 in regular traffic. personaly i don't glue my eyes on my tacko i look at the road! as should you all. ya take a look down every once in a while but if your speedo is not working can you have 100% trust in your tacko? i can't. I would replace everything, to make sure that it did not happen again.

so man fight it and see what happeneds. like i said i don't know your law but in canada there is reasonable doubt and they are more persuasive.

I have been caught doing 135 in a 100 zone and i got away with fighting it because there was a bus doing 60km/h in the fast lane.

So don't fret aout it what is done is done, get the car fixed, and learn from teh mistake that you made and if a judge see's that you are legitimate then your going to get off.

and i disagree my car drives very comfortabley at 4000RPM

PS in canada you can be causght ding 100KM/H over the speed limit and you still only get off with a fine! no jail time no suspention, just fine and points!

Here is some constructive feedback

One thing that might help is to tell judge (if it isnt on the coppers report) that you didnt know speedo was busted and only found out after you received the fine, and have since booked it in to get it fixed.

That would maybe be a bit more plausible if it was reading LOWER than his actual speed and not higher.

What's your driving record like? Been busted before?

Fight it if you want, but like others have said you'll be trying to get out of one crime by admitting to another. Not a smart idea!

Good luck mate!

That would maybe be a bit more plausible if it was reading LOWER than his actual speed and not higher.

What's your driving record like? Been busted before?

Fight it if you want, but like others have said you'll be trying to get out of one crime by admitting to another. Not a smart idea!

Good luck mate!

I was just staying under the 180 mark as thats what it read when i was driving to sydney and i was sitting with the rest of the traffic. Ive had it fixed now and the guy said they found it was fluctuating up to 70km's out. sometimes it was fine, then it would be slighlty out, then it was reading ridiculous figures. I'm not going to contest it even though i have a report from the calibrator specifying all this as i cant see them letting me off. legal advice ive gotten indicates a very small chance of success. Its only 6 months as well, not 12 as i previously thought. I'm happy to support our state rail system for a few months. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...