Jump to content
SAU Community

Recommended Posts

:burnout: Im bringing my old school skyline back from the dead

now i know these days R32 R33 R34 are the rave for the skyline models but i like the old one cause you don't see as many around and when done up they look nice

NOW i want to know i got a 1981-82 skyline i want to know what sort of make R30 my car is

i want to keep the motor as is but put little add ons to help with performance air filters -fuel- etc anyone got more info on these kind of mods i don't want to turbo the car it's got plenty of power for a 20 year old car it runs with holden 308's easily but i want to put a rear wing and a front bar on it and stuff so if anyone got some more info for us i would like that thanx to get my beast i got totravel from brisbane then head towards canberra to get it ?

i sold it to a car yard 3 years ago and it's been there since the bloke nearly tripled the price and now it's back to the price i sold it for so im grabbing it while i can?im from brisbane and once going i want to meet up with some of you's skyline fans any chance of that ?:shake:

Link to comment
https://www.sau.com.au/forums/topic/10871-old-school-skyline-for-me/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Guest nismogtsx

The old school DR30 or R30 as know by some are well know for the FJ20 motor.... The old school 2.4 litre 6 is pretty gutless in compairison to the rb series of motors....

Plus they are very, very expensive to fix... I worked on one onc for a customer back in my auto-electric days and we ended up charging over $1400 for a basic re-wire.... It turned out to be my biggest night mare.... Those cars when in good condition run well.... But after 20 years the wiring gets a little tacky...

basically the wiring is good motor might need attention cause it has sat for so long and i'll be getting it back to how i had it

it's all standard but a few little mods , a few more and a reconditioned 2.4 ltr and i'll be sweet again?

maybe in the near future i might do a motor swap for something with turbo or nos or supercharged who knows with all the options?

Hi hoon69 I own an '84 R30 hatchback. I modded this car with a passion for 5 years. Then a couple of years ago some scumbags decided it was their turn, came back from a swim ..... empty space. Sh_t and the new tyres were still on my account. Got a call from the cops 3 days later. Cars a write-off, nose first into a drain. The wreck has sat in a shed since then waiting for me to do something. As I've recently bought an R32 GTS-t I don't know if I should wreck it, sell it complete or transfer all the good bits to an R30 sedan that I bought for that purpose. Mods include L28 2753cc P90 head engine with hi-lift cam heavy-duty valve springs, cold air induction, custom extractors, S.S. 2.25" exhaust, DYI quickshift, altered G/box ratios, R200 diff, O/size half shafts, DR30, front disc and calipers, konis all round, -40mm kings springs (front), nolathane bushes, revised lower arm mount points, adj. castor rods, F & R strut braces, nismo front seats, $5K stereo with 400 hour self install, round tail-lights, plus dozens of nice touches and reconditioned parts. It was a good ride while it lasted. If you are interested in the car or just want info on specific mods please P.M. me or post here.

Stang, BOoStEr here. Stock RB30 powered R31s made 118 KWs ,GTS1s 130 KWs, GTS2s 140 KWs The GTSs had nice S.S. extractors, exhaust, cam, head and ecu mods. I have an RB30 ecu with a Chiptorque programmable chip in it. It is currently programmed to suit Chiptorque spec. stage 3 camshaft , O/size throttlebody, H.M. headers and 2.25" sports exhaust. These mods are good for 140 KWs+.I might sell these parts minus the exhaust (to suit RB30 VL). Problems I,ve encountered in aussie R31s--- noisy diffs (premature gear wear),crank angle sensor (usually dirty connector plugs or degree wheel in distributor). Any questions just P.M. me or post here.

Stang, I'd be guessing a bit as prices vary a bit from place to place. Value dependant upon condition moreso than age.

A series3 may bring $1000 or so more than an early model in the same condition.

GX,GXE $2000-$5000

Silhouette,Ti $3000-$7000

GTS1 $7000-$11000 (only 200 made) Lots of fakes

GTS2 $8000-$12000 (only 200 made) " " "

Genuine GTSs have a numbered badge on the glovebox.

As a collectors vehicle a vendor may feel justified holding out for a

higher price for an exceptional GTS.

darkhalf, S.S. is stainless steel. I'd bet the SVD extractors had more R & D than the hurricanes.

Stang You don't want a locked diff on the street. They are only at their best on the dragstrip or on a dirt track. If they are done properly they are stronger but suffer a lot more stresses on corners. If you are worried about the aussie diffs you could always buy a jap HR31 instead and get IRS and LSD.They have a tougher diff and are usually a bit cheaper than an aussie GTS but they only come as coupe or 4door pillarless.

BOoStEr

darkhalf, S.S. is stainless steel

duh! thanks !!!

I'd bet the SVD extractors had more R & D than the hurricanes.

thats what I thought until I swapped them over from the hurricanes on my GTS 1 engine. lost a bit of power because of the port size difference (smaller than the ports in the head). now im shaving the GTS extractor ports to 36mm cause i got my new exhaust fitted to these extractors last week :D

Stang, It's too much trouble to fit the jap independent rear end to the aussie R31 as these all had Borg Warner solid axle rear ends like the VL. I've heard people say they will try but I've never seen it done. If drifting was the only type of driving ever used then locked might be a cheap way out but a good LSD is always worth the extra money. A good diff place should be able to recommend some tough internals with LSD for stock aussie diff housing.Make sure you get lower than stock ratio(3.7:1) if you want to drift eg. 4.1:1.

Maybe we should apologise to hoon69 for 'jacking his thread.

hoon69 If your Skyline is an MR30 with the L24E engine a good set of extractors and a 2.25" sports exhaust (get rid of left to right tail pipe extention) will help a lot. Get rid of the airfilter cross-pipe and duct cold air through the radiator support panel into the top of the airbox and replace the std filter with a K&N panel filter or similar. Get good plugs and leads and make sure the distributor is in good condition. Beyond this further mods require more money than you should probably spend on this motor. The L-jetronic computer is the old analog type and is very inflexible.It requires electronic tricks to accomodate any mods.if you really want to make good power out of this motor you will need a programmable ecu. Then you could make a custom inlet manifold, do some headwork, cam, and raise the compression. An L28E bolts straight in and looks stock and has another 360ccs. how far do you want to go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List:
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...