Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

And now that Subaru has dropped the Liberty GT, if you want a new car with a factory turbo the Mazda6 MPS has become the only choice.

If I had to buy a cruiser / family type car for that price, and I wanted something new and with warranty etc....I'd be hard pressed to choose between the MPS and the 300C. Depends on if I want show or go, I suppose :D

There are still plenty of factory turbo cars left e.g. EVO's, Subaru's, VW golf and polo gti, renault megane 225 and prolly a few more of those europeans too.

I think for the price, it would be really hard to beat an evo if you wanted go, just a shame they are fairly basic inside and look like they do on the outside.

Active AWD is Front/Rear 100/0 - 50/50 so still a FWD based car with the inherent shortcomings.

Don't know what you're talking about with the el'driftloser focus on the marketing Shan :D

Basically, still just a current crap shopping trolley Mazda tring to hang onto the success of their only real zoom zoom model - the RX-7

Basically, still just a current crap shopping trolley Mazda tring to hang onto the success of their only real zoom zoom model - the RX-7

Actually I thought it'd be a throwback to the AWD turbo Mazda 323/Familia GTX's of the late 80's than an RX-7. The old AWD mazda's were great fun (and they rocked the rally world something stupid), so if they're anything to go by this new version should be sweet.

Gotta agree on the old mazdas, back when the company had some cred. Murray Coote was in my club running a 323 Familia GTR in QRC/ARC with the big turb and hand built engine, plus a variable torque split. I'd still love to garage one of them.

Mazda have become a company trying not to offend anyone, but still pretending their cars have go. Eg the RX-8, the best thing can be said is it has great handling, which is just code for it's gutless.

Mazda have become a company trying not to offend anyone, but still pretending their cars have go. Eg the RX-8, the best thing can be said is it has great handling, which is just code for it's gutless.

:laugh:

so true, >_<

but RX-7 always have special place in my heart!

Edited by RBFIRE
Active AWD is Front/Rear 100/0 - 50/50 so still a FWD based car with the inherent shortcomings.

Don't know what you're talking about with the el'driftloser focus on the marketing Shan >_<

yes shan, please let me know what you were smoking when you dreamt up this rwd bias drift action? because i need to get some... lol

yes shan, please let me know what you were smoking when you dreamt up this rwd bias drift action? because i need to get some... lol

According to the magazine reviews, its not a "RWD drift bias".

When you reef the handbrake it disables the stability and traction control systems (as well as removing all drive to the rear wheels).

When you drop the handbrake it just dumps the power back to the rear (rather than letting it in smoothly), which is meant to continue the lack of traction by shifting from lockup to wheelspin. It doesn't turn the traction and stability control back on either.

If I ever take a Mazda6 MPS for a test drive, I'll be sure to test the feature out. If the sales drone complains, I'll tell them that its something Mazda designed into the car so its something I need to try. :)

There are still plenty of factory turbo cars left e.g. EVO's, Subaru's, VW golf and polo gti, renault megane 225 and prolly a few more of those europeans too.

I probably didn't word it too well, since I thought that in context it was quite obvious where I was going with it.

I meant a factory turbo family car, and preferably one that isn't FWD. The Euro cars in that price range are generally too small, with the exception of perhaps a FWD Audi or Volvo.

The Golf, Impreza, Megane etc are a bit smaller than the Mazda6 / Liberty.

Thanks for the pics scathing you smartass! haha

I like this car, and to be honest I think i like it more then the new skyline. Definantly better looking I think. Interior is plush, a modified kit set of rims and a good window tint and stereo.

Ill have one. who wants my r33?

If I ever take a Mazda6 MPS for a test drive, I'll be sure to test the feature out. If the sales drone complains, I'll tell them that its something Mazda designed into the car so its something I need to try. :P

That's exactly what I was planning on doing, and if the rep kicked up a stink I'd just let him know its a feature that needs to be tested.

Although... my neighbour just bought a Chrysler 300, and it looks like sex on wheels, I've ordered some 21" rims for him and a bentley style grille, he's already getting pedders to drop the suspension 1.5 inches... and that's all its gonna need to look fantastic. Its a bit of poo as far as power you get for the price you pay (they retail for half of what they sell for here in the US and UK) and the interior looks like it belongs in a Kia.

Dont know how they have sold so many of those 300's. Sat in 1 at the motor show and for an apparent luxury car it was pathetic.

Tell ur neighbour not to be weak and get some 22's not 21's. The wheel arches are so large on those that they wont be a problem to fit.

For the money though I would not be buying one brand new considering the other options out there.

Dont take any notice of the retail price, the street price is $50k on the road for the leather trim car .

Mazda are having trouble shifting them . I drove one when they first came out, they are not a bad car but the weight ( 1600+kg for the leather model) kills performance . The other thing i dont like its a fwd car for most of the time ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...