Jump to content
SAU Community

Recommended Posts

  • Replies 216
  • Created
  • Last Reply

Top Posters In This Topic

just did a reasonable roadtrip and got 550klms from a tank including around 80klms of town driving from full till the light came on so that would be around 9 or 10ltrs per 100klms? but thats with pretty much stock everything.

On the way from Brisbane to Rockhampton got the following figures:

420kms out of 52.72 ltrs (half town, half highway)

315kms out of 35.16ltrs (All highway)

And man-o-man the rockhamptonites must be getting sore necks by now....... It's like they have never seen a wagon that sneezes ;)

On the way from Brisbane to Rockhampton got the following figures:

420kms out of 52.72 ltrs (half town, half highway)

315kms out of 35.16ltrs (All highway)

And man-o-man the rockhamptonites must be getting sore necks by now....... It's like they have never seen a wagon that sneezes :devil:

420kms out of 52.72 ltrs = ~12.55l/100kms,

315kms out of 35.16ltrs = ~11.16l/100kms

Dude, these are excellent figures!

Yeah the day before I came up here I had Mercury do a "highway cruise" tune and they did an excellent job eh, there is a tiny issue with it but considering the fuel economy I get while cruising at ~100kph I am more than happy with the results.

Just goes to show what the pfc is capable of for future tunes.

Ive still got a stock ECU and i can get 11L/100 on the freeway.

Not sure whats happend as when i first got the car, i couldnt do better then 14L/100 freeway and 17L city. Now, i get 11L highway and 15L city....interested to get the ITC and DFA tuned

i get between 300 and 350 from 50l round town

400 to 500 on a trip

when i tow my 32 i get about 250 to 300 per tank(60l) does this seem right, what do others get while towing? i've got an safc to go on it before i go down to sa for the first round of the drift australia championship. i'll post up results when i get back

On another note, the other night while driving about 450km of mixed hard driving, cruising at near the speed limiter (~160 most of the time) and city/town, from 68L I got 470km

(I took a jerry can with 15L with me)

So somewhere around under 15L/100. I was quite impressed as there was LOTS of time spent at 5000rpm+

hmmm im getting 200km from a full tank in city driving and 400km for highway driving.... i thought this was normal but obviously im having some dramas. Im not getting any backfire etc (well occasionally when changing down gears and slowing down) but i didnt think i was running too rich.... im having some fun parts put in soon so hopefully with the retune ill run more power and better fuel, 200km off a full tank is rediculous

  • 1 month later...
SK reported improvements of around 1L/100 after the DFA was installed.

I am certain it would make a massive difference. I think I might give the DFA a quick tune for the time being after I install the turbo, until I can afford to get the cams/unichip done. At least I will get a bit more power and better economy until I can afford it.

what's a DFA?

  • 3 weeks later...

One thing to keep in mind looking at this thread, is we've got at least two types of stageas being compared - series 1 versions (which I have) and series 2 versions (neo engine?) , then also possibly some later model ones with the VQ series engine ? If there are people comparing fuel consumption of the VQ series engine with the RB, I reckon the VQ will win hands down, as anyone who has owned a Maxima will attest, they are fantastic engines and very efficient.

Unfortunately, I have an early model, series 1 stagea, and was initially appalled at the fuel economy of the stock vehicle. Now after 18 months or so of ownership, we're consistently getting 520 to 540 km out of a tank (55-58 L fill). Mostly commuting, and running around in short to medium trips, rarely in peak hour traffic. If you want to know what I put this down to, it includes (in order of merit)

Jaycar Digital fuel adjuster -- don't leave home without it, worth about 10% improvement

Revised valve body for the auto from the guys in Adelaide, worth about a 10% improvement I reckon

behaviour - light foot and drive around with converter locked up in overdrive as much as possible

3 inch free flow exhaust and K&N panel filter - let her breathe

Iridium spark plugs - they extend the lean misfire limit allowing me to tune the DFA leaner at cruise.

keep tyre pressures above 35 psi (heavy car)

These are the mods that have got us from the original 15-17 L/100 km when we bought the car, to the now manageable and repeatable 10 - 11 L/100 km. In fact, we now get the same fuel economy towing my gazelle and trailer (total 1500 kg) than we did with the original stock car in an unladen state ! Not bad for a series 1 RS4 auto.......

In fact, I haven't been on a long run since the valve body upgrade in the auto, which has made such a dramatic improvement in performance and economy, that I reckon next time we go for a long drive, a high 9 L per 100 km will be on the cards for sure.

Quick question, when does the fuel light come on? Is it when the actual fuel gauge is showing at or below Empty?

I don't wanna find out the hard way that my fuel light doesn't work - unless I carry a Jerry Can around (which I'd rather not do).

In my old Corolla, the fuel warning light would come on as soon as it hit a quarter tank, so I always knew where I stood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...