Jump to content
SAU Community

Recommended Posts

  • Replies 216
  • Created
  • Last Reply

Top Posters In This Topic

just did a reasonable roadtrip and got 550klms from a tank including around 80klms of town driving from full till the light came on so that would be around 9 or 10ltrs per 100klms? but thats with pretty much stock everything.

On the way from Brisbane to Rockhampton got the following figures:

420kms out of 52.72 ltrs (half town, half highway)

315kms out of 35.16ltrs (All highway)

And man-o-man the rockhamptonites must be getting sore necks by now....... It's like they have never seen a wagon that sneezes ;)

On the way from Brisbane to Rockhampton got the following figures:

420kms out of 52.72 ltrs (half town, half highway)

315kms out of 35.16ltrs (All highway)

And man-o-man the rockhamptonites must be getting sore necks by now....... It's like they have never seen a wagon that sneezes :devil:

420kms out of 52.72 ltrs = ~12.55l/100kms,

315kms out of 35.16ltrs = ~11.16l/100kms

Dude, these are excellent figures!

Yeah the day before I came up here I had Mercury do a "highway cruise" tune and they did an excellent job eh, there is a tiny issue with it but considering the fuel economy I get while cruising at ~100kph I am more than happy with the results.

Just goes to show what the pfc is capable of for future tunes.

Ive still got a stock ECU and i can get 11L/100 on the freeway.

Not sure whats happend as when i first got the car, i couldnt do better then 14L/100 freeway and 17L city. Now, i get 11L highway and 15L city....interested to get the ITC and DFA tuned

i get between 300 and 350 from 50l round town

400 to 500 on a trip

when i tow my 32 i get about 250 to 300 per tank(60l) does this seem right, what do others get while towing? i've got an safc to go on it before i go down to sa for the first round of the drift australia championship. i'll post up results when i get back

On another note, the other night while driving about 450km of mixed hard driving, cruising at near the speed limiter (~160 most of the time) and city/town, from 68L I got 470km

(I took a jerry can with 15L with me)

So somewhere around under 15L/100. I was quite impressed as there was LOTS of time spent at 5000rpm+

hmmm im getting 200km from a full tank in city driving and 400km for highway driving.... i thought this was normal but obviously im having some dramas. Im not getting any backfire etc (well occasionally when changing down gears and slowing down) but i didnt think i was running too rich.... im having some fun parts put in soon so hopefully with the retune ill run more power and better fuel, 200km off a full tank is rediculous

  • 1 month later...
SK reported improvements of around 1L/100 after the DFA was installed.

I am certain it would make a massive difference. I think I might give the DFA a quick tune for the time being after I install the turbo, until I can afford to get the cams/unichip done. At least I will get a bit more power and better economy until I can afford it.

what's a DFA?

  • 3 weeks later...

One thing to keep in mind looking at this thread, is we've got at least two types of stageas being compared - series 1 versions (which I have) and series 2 versions (neo engine?) , then also possibly some later model ones with the VQ series engine ? If there are people comparing fuel consumption of the VQ series engine with the RB, I reckon the VQ will win hands down, as anyone who has owned a Maxima will attest, they are fantastic engines and very efficient.

Unfortunately, I have an early model, series 1 stagea, and was initially appalled at the fuel economy of the stock vehicle. Now after 18 months or so of ownership, we're consistently getting 520 to 540 km out of a tank (55-58 L fill). Mostly commuting, and running around in short to medium trips, rarely in peak hour traffic. If you want to know what I put this down to, it includes (in order of merit)

Jaycar Digital fuel adjuster -- don't leave home without it, worth about 10% improvement

Revised valve body for the auto from the guys in Adelaide, worth about a 10% improvement I reckon

behaviour - light foot and drive around with converter locked up in overdrive as much as possible

3 inch free flow exhaust and K&N panel filter - let her breathe

Iridium spark plugs - they extend the lean misfire limit allowing me to tune the DFA leaner at cruise.

keep tyre pressures above 35 psi (heavy car)

These are the mods that have got us from the original 15-17 L/100 km when we bought the car, to the now manageable and repeatable 10 - 11 L/100 km. In fact, we now get the same fuel economy towing my gazelle and trailer (total 1500 kg) than we did with the original stock car in an unladen state ! Not bad for a series 1 RS4 auto.......

In fact, I haven't been on a long run since the valve body upgrade in the auto, which has made such a dramatic improvement in performance and economy, that I reckon next time we go for a long drive, a high 9 L per 100 km will be on the cards for sure.

Quick question, when does the fuel light come on? Is it when the actual fuel gauge is showing at or below Empty?

I don't wanna find out the hard way that my fuel light doesn't work - unless I carry a Jerry Can around (which I'd rather not do).

In my old Corolla, the fuel warning light would come on as soon as it hit a quarter tank, so I always knew where I stood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSP male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSP reducing bush?
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...