Jump to content
SAU Community

Recommended Posts

Positives:

- Looks awesome to people who appreciate it..

Negatives:

- Incorrectly used, you can smash your front bar onto the pavement!! Not to mention exhausts etc.

- Shitty car handling. I've heard that it makes your car handle like a boat, even when lowered!

- EXPENSIVE!!

- 70% of people (IMO) will think you're a total tool.. :D

Edited by Primordial
Positives:

- Looks awesome to people who appreciate it..

Negatives:

- Incorrectly used, you can smash your front bar onto the pavement!! Not to mention exhausts etc.

- Shitty car handling. I've heard that it makes your car handle like a boat, even when lowered!

- EXPENSIVE!!

- 70% of people (IMO) will think you're a total tool.. :P

Amen.

Hydraulics are definetly not allowed in nsw, Airbags (bags as truckers call them) are ok. I have plenty of mates into the whole truck thing. Also have a mate with a bagged cresida now it is cool it is somethin very different.

Each to there own, where as the handling comment when the bags are right down it handles like a boat but when the bags are full of air it is seriesly stiff.

my 2c worth

Jamie

yeah, def not in a line eh! bag- snags, it's all wank, im mates wit the guy wit the cressie 2, IT'S PHAT, like ol' grandpa joe stlye and shit... but i have a mate wit a bagged lux, pretty cool, but as i and mate say, it's pretty W.A.N.K. also had a mini- dick show here in port cuppl weeks back, some were pretty sweet, but the majority were just all covered in primer... like jamie said, 2 each there own... Keep it spooln..........

Agree fully brett W.A.N.K factor. But you no the funny thing is most our cars are as low as there's an we aint on bags and we dont have as much bog, im guessing the idea of bog on the trucks is the extra weight will lower it some more im guessin thats there idea anyways. Dont think i dont appreciate a good truck because i do but i just find it hard to understand why most of the trucks are WORK in progress.

They (well most of them) live on a diet of wank and bongs...

should've seen all of them stoned runnin round at the truck show here a cuppla weeks bac... stupid f**ktards... yeah, its not a mini truck wothout bog or the occasion thong to go with it... ha ha... Like i said previously keep spooln!

dont get me wrond, sum trucks are sik! but why waste a turd load of money on somethin that lasts 5 mins but takin 10 mins to wait for the 5 mins again, (air runs out- compressor refilling-3 hours 34 mins later, yay more air)-spose its better than drugs but they still do that!

Hydraulics are definetly not allowed in nsw

that's news to me. I drive a car with hydraulic suspension pretty much every day. my soarer is one of 800 to come equipped with full hydraulics. (no not the usual shithouse soarer airbags). It was complied and registered in this state.

Love airbags n hydro's... both our VIP Celsiors have airbags (factory with aftermarket controllers to allow em to sit an inch off the ground) and the Maxima has hydros...

post-12522-1128253996.jpg

post-12522-1128254044.jpg

post-12522-1128254100.jpg

CIMG0032.JPG

CIMG0035.JPG

doin the dogleg (one wheel off the ground)

CIMG0044.JPG

Hydraulics suck for handling and ride comfort,because its like having no springs at all and dampening is only provided at the midpoint of the height, ie there's no travel in shock absorption at full height and minimum height. They pull the chicks though... apparently. Airbags are much nicer for handling and ride comfort. Get an Air Strut though... they're replacement struts with airbags built in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...