Jump to content
SAU Community

Recommended Posts

hi i was wondering if anyone knew of any hassles or precautions that may occur when fitting a rb25 to r32 gts4 , and any idea's or comments about engineers cert for it("does it need it"). also is it worth wild over looking the 26 because of cost and oppting for the 25

Link to comment
https://www.sau.com.au/forums/topic/109142-r32-rb25-help-plz/
Share on other sites

PM Blind Elk...did the same thing you are considering, champ bloke who wont lead you astray with BS if he doesnt know...unlike me, who will tell you RB25s suck....p0pl who have put an RB25 in an R32 are probably the same ppl that piss all over the seat of the public toilets...i hate those guys :P

...p0pl who have put an RB25 in an R32 are probably the same ppl that piss all over the seat of the public toilets...i hate those guys :)
Oi. I represent those remarks :P

carl, put a RB25DET in, it will almost beat hands down a modded RB20DET. My RB20DET punched a whopping 115 kW through all 4; the RB25DET, running aftermarket ECU and crap 95 octane (Oz octane) and 10psi pushed 180 out through all 4 wheels. I figure that's close to a stock GT-R, and beats the crap out of those 5 litre lumps of cast iron V8 push-rod crap that can't even push that off the flywheel.

Oi. I represent those remarks :/

carl, put a RB25DET in, it will almost beat hands down a modded RB20DET.

Yeh yeh yeh...we know...But in my small galaxy the hot girls dont think they could ever be so lucky as to land a guy like me, thats the reason they ignore me...and the RB20 is god because i f i blow it up its $600 :D

Yeh yeh yeh...we know...But in my small galaxy the hot girls dont think they could ever be so lucky as to land a guy like me, thats the reason they ignore me...and the RB20 is god because i f i blow it up its $600 :D

Sounds like the planet where i live, but if my bottom end blows, its $100 :/

bottom end might be $100, but the adapter is $450 minimum.

mods to make it work on 4wd = another couple of hundred.

mods to the vvt head to make the vvt work = dollars.

oil restrictors to the head = small dollars

mods to engine mounts = more dollars.

new turbo due to 3L sucking your current turbo dry at idle = $1900 minimum.

to make use of this turbo and capacity, you'd want injectors, fuel pump and new tune = many more hundreds.

if you don't have the PFC already to run all this = $1000

New AFM to make use of all these goodies during the tune = $300 +

as much has I hate to say it, my rb30 dreaming days are over for the gts4.

I'm stuck with the ROYb20det.. :/

I've worked out I should be able to get to a REAL goal of about 200rwkw with about $4K and still have a drivable road car without TOO much extra lag.

I'll save my rb30 dreams for the future.. if I can be bothered.

so ROY - can I come back to the clan?

so ROY - can I come back to the clan?

Im not sure really, you seem for too sensible to become a blibbering RB20 POWAH idiot :no:

WHne im back in Syd next, take my car for a spin...im betting it will convince you to spend the extra 6 months spreading the cost of the RB309 over a longer period. I love my cars...its ace...but if you want grunty mid it just doesnt do the job

where do i get another rb20 for 600 bucks i just bought the rb30 and was gonna do the goods but i dont want to spend that dosh as my engine is lossing oil presure and has a wine at 1200 rpm and sounds like its coming from the 1st cam bearing (help)

where do i get another rb20 for 600 bucks i just bought the rb30 and was gonna do the goods but i dont want to spend that dosh as my engine is lossing oil presure and has a wine at 1200 rpm and sounds like its coming from the 1st cam bearing (help)
If you're in Melbourne, you bring a trailer and $600 round to my place - I still have the RB20 that I took out of the R32.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...