Jump to content
SAU Community

Recommended Posts

as soon as i saw the news story and they said speed was a major factor in the accident, then i saw the space saver on the back, i was shocked!

dont know why you would ever drive fast on a space saver,

I also heard they wernt wearing seatbelts at all too, the kid was flung from the car and landed in nearby park...

Rip to the driver and passenger, terrible loss of life

RIP

isnt it funny how they dragrace with space saver wheels on the front??

i doubt id ever do that tho

Those cars you see using space savers on the front while drag racing are more than likely using front runners (drag tyres), not the actual space saver tyre.

keeplleft what do you do for a living?

I write text for driver manuals around the world ranging from New York to NZ, to EU, Middle East, AUS - esp crash scenes (see the url in my Sig) and hazardous weather lighting texts, motorway lane use text, look after the sick and dying, nag all governments for funds and a better road user deal, nag treasuries too (the most powerful of all agencies) and fight for high standard improvements to our road design guidelines. RTA called me a motorist's advocate back in 1983 and its stuck since. I am now mostly dealing with NSW, when attending functions et al keep quite, take note - and often take the fight from there.

Member of literally a zillion motor forums (and Sat TV/Consumer sites), where if I get the time I post. Paid particular attention to this forum after the Skyline crash that killed three persons on the NSW Central Coast, with one of those victims mother being personally known to our federal roads minister. In effect, to gain an understanding of what folk in this group think, feel and act.

Edited by Keepleft

I can vouch for how dangerous those space savers are. I had to put mine on when I had a flat. I crawled away and around the first corner (seriously below 10km/h) and the tyre rolled off the bead and went flat in about 5 seconds!!! Obviously there was not enough pressure which caused the issue. Just lucky it did not happen at a faster speed.

Lesson, don't drive around on space savers and make sure they are pumped up if you have to.

All the best to those left behind.

Edited by JCMarshall_Law

Very sad to read.. never good to hear when something happens..

condolences to the family.. I hope people realise not to drive with space savers unless required..

if i'm correct - running a space saver (15" wheel approx.) vs a 20" wheel with an LSD is very dangerous as it will cause the diff to lock prematurely (rotating at different speeds)..

anyways.. unfortunately these things happen.. hopefully people learn from it..

A better alternative to the space saver is carrying a puncture repair kit, and a small 12V air pump. The best thing about that is as long as the puncture is repaired properly you can drive on it at full speed again once the sealant sets. I took my bike around Eastern Creek when it had one of those plugs in it, I don't know what my top speed got to but it was well over 200kph. I wouldn't have done that very often though, but it was a single track day and bike tyres wear out quick.

Of course you are screwed if the puncture is too close to the sidewall or the tyre is too damaged, but that's what NRMA and free towing is for. I'd rather do that than drive around on the space saver, especially after this sad news and other people's bad experiences with them.

(incidentally I still have my space saver in the boot, but it's only to support the cardboard floor)

please people stop goin on wit this shit alright and say crap they were 2 mates of mine and there would b a good reason for why they wer doin this and the only person who seen it is so shakin up he still hasnt event said 2 words since he got back to dubbo. and the thing about no seat belts are crap as the family said they were all ripped from the seat belts and from wat else l heard cody's mum wasnt even in the car.all l got to say is R.I.P Russel Condon and Aaron Lacrosse

Edited by mako86

I'm sorry if I sounded insensitive I was and still am really sad and shocked to hear the news and I do offer my condolences. I wasn't trying to say it was their own fault, I know accidents happen and I was just trying to offer advice for anyone else contemplating the space saver tyre to try helping reduce the possibility of something simliar happening again.

Sorry to hear of the loss of life, just plain terrible.

Quick clarification of the space saver issues;

1. If the space saver is correctly inflated to its recommended pressure it is quite safe to drive on at a normal pace, not exceeding the recommended max speed of course. Remember 80 kph is the max STRAIGHT LINE speed, not to be confused with doing 80 kph around a 35 kph hairpin.

2. If the space saver is the same diameter as the other road tyres then there is no problem with the ATTESSA or the LSD. It’s all about diameter, the width is irrelevant.

3. On an Easter Weekend I drove from just south of Sydney to Melbourne on a space saver, I had no choice, no tyre shops open on Good Friday. I checked the tyre pressure and temperature at each stop. I had no problem keeping up with Good Friday traffic and the space saver showed very little (if any) sign of wear from its 100 k’s or so of use.

A space saver is just as good as any other tyre, as long as it is used within its design parameters.

:P cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...