Jump to content
SAU Community

Recommended Posts

Yeah would work, I personally don't like that one myself and I normally use the one below, don't know why just prefer it over many of the others, just remember clean both surfaces well with carby cleaner put a thin bead around the aac valve let it dry for about 15 minutes finger tighten let dry for another 15 minutes then tighten her up.

http://m.supercheapauto.com.au/Product/Permatex-Ultra-Blue-RTV-Silicone-Gasket-Maker-Multipurpose-95G/5352

Just completed this....took a newbie hour and a half. Car is a lot smoother both when accelerating and standing still. Seems to have removed the engine hunting issue.

One thing I did differently was cleaning the insides, spraying wasn't doing much so ended up filling a bowl with the cleaner and letting it sit for 5 minutes. Also the gasket was in pretty decent condition so just used the same one.

Thanks for awesome walk through! :yes:

  • 1 month later...
  • 3 weeks later...

I've been having a few issues with my car recently in the way thats it seems sluggish and hesitant through the rev range specifically between 2-4k
I recently adjusted my AAC valve before reading this without first unplugging the brown plug (rb20det) could this be a cause to the issue, maybe I adjust it too far or something? Ideas?

  • 5 months later...
  • 8 months later...
  • 2 years later...
  • 11 months later...

Hey All, 

First of all good write up!

Has anyone ever had an issue where they have cleaned their IACV and then put it all back together to have a ticking noise from the IACV? Seems to only be present when revving the car and sometimes at idle. I've made 100% sure it is coming from the IACV by unplugging the brown connector, seems to stop straight away when unplugged. Let me know guys, it's doing my head in. 

 

Dan

So I'm stumped... all of a sudden my idle hangs at around 1400rpm for about 30 seconds before it drops to it's set idle of 900rpm, cleaned aac valve and tried adjusting etc etc with no luck, any ideas?

Hi All, 

Per my last post, I think the issue maybe due to frequency setting on my Wolf 3D V4. Did some more searching online last night and read that someone has a similar issue to me but in a Haltech. 

https://forums.haltech.com/viewtopic.php?t=11221

Since I don't have the hand controller or the cable to connect to the Wolf, I may have to give it in for a tune. 

I'll update once I have more information.

Dan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...