Jump to content
SAU Community

Recommended Posts

Hi all I just bought a R32 GTR and I love it. I have driven a few cars in my time and so far I have found the GTR the most fun to drive. The way you can throw it around is unreal.

The car is stock exp for zorst and turbos which has hks 25, 30’s. I was looking at getting an ecu but there are so many to choose from I don't know what to get.

This is what I have being tossing up between so far, PFC, WOLF3D v. 4.

Has anyone hear used the wolf, I know most ppl hear are using the PFC just would kike to know what the wolf's are like. Also I live out near Airport west, can anyone recommend a good work shop out that way or any way around this side of town or along the western ring road towards Epping? Any help would be great.

By the way this is far the best forum out there for Nissans keep up the good work...

Edited by madness
Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Hi Madness,

I have used the Wolf for the last 3-4yrs and believe it to be an awesome ecu. There are alot of ppl/tunners that would disagree and say otherwise, but they most probably have not used the wolf b4 and couldn't use it's numerous features to tune it.

I have had my car for approx 5-6yrs an have solely gone to EAS Performance all this time, not alot of ppl can say that about their w/shop of choice :D.

They are located at:

11 Victory Rd

Airport West

tele:9330 2001

Speak to Vic, he will tell you a little more about the Wolf's features.

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2039951
Share on other sites

Hi Madness,

I have used the Wolf for the last 3-4yrs and believe it to be an awesome ecu. There are alot of ppl/tunners that would disagree and say otherwise, but they most probably have not used the wolf b4 and couldn't use it's numerous features to tune it.

I have had my car for approx 5-6yrs an have solely gone to EAS Performance all this time, not alot of ppl can say that about their w/shop of choice :P.

They are located at:

11 Victory Rd

Airport West

tele:9330 2001

Speak to Vic, he will tell you a little more about the Wolf's features.

Thanks for that, I did ring them up spoke to Vic, He is more of a wolf specialist, he said to me that if I want to go the pfc route I should speak to Ben from race pace, all in all he was very nice to me and said to me that at the end of the day it's up to me to choose what i want. He's really passionate about what he dose which is a must.

i wouldn't recommend wolf for a GTR, i'd go with Power FC

Can you please give me some reasons as to why I shouldn't go the wolf option?

It's all fair and just to say one thing but it's also good to state reasons, I am not having a go at you I would just like to hear your opinion(s) on why.

Edited by madness
Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2042684
Share on other sites

If they are valid reasons post them up here, as i too would like to know why Wolf is not good.

I know that, even though the Pfc is a great ecu and highly regarded, it only has 6 load point (wolf=16) and does not have an air temp sensor. So on hot days you have to change your driving style where-as the wolf will automatically retard the ignition.

Don't mis-understand me, i am a big fan of the Pfc, as it has been proven to be a stable product, but i rate the Wolf at least as high as the Pfc. The wolf is a bitch to tune, but that is not you problem, but that is why alot of tunners don't like them, as they have no idea of all it's features and how to use them.

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2043117
Share on other sites

Thanks for that, I did ring them up spoke to Vic, He is more of a wolf specialist, he said to me that if I want to go the pfc route I should speak to Ben from race pace, all in all he was very nice to me and said to me that at the end of the day it's up to me to choose what i want. He's really passionate about what he dose which is a must.
That is exactly why i use him and listen to his advise. He is a "no bullshit" guy and if he can't do something, like tune a Pfc, he will direct you to the best in the industry. Having said that, there is no-one else i would go to for my spanner work, as he takes the time to do things properly. No reason why you can't use Vic for the spanner work and if you decide on the Pfc, to use another w/shop for tunning. I have a few mate's that do just that, and they too are very happy with Vic's workmanship.
Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2043135
Share on other sites

I like the fact that with a wolf they have a lifetime warranty and that they are a local product,

Also that they are roughly the same price as the PFC,

But one of my mates knows someone selling there PFC for $800 with hand controller.

That’s why I have asked the question.

I have been trying to way up the costs.

Now if I want to change airflow meters I will need to fork out an extra $$.

Ill just have a think about how much power do I want, because if I want big hp in the end I think it's going to be better to get a wolf for the fact that I can get away with not using afm as such and I don't need to buy a boost controller.

Like I said ill think about it and see if I can find out more about the two, i.e. same car same mods different ecu and compare the two. Value for money. Also I think two that in the end of the day it comes down to the tuner... Thanks again for all your help ppl ill keep you all posted as to what route to choose

, :dry:

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2043277
Share on other sites

I like the fact that with a wolf they have a lifetime warranty and that they are a local product,

Also that they are roughly the same price as the PFC,

But one of my mates knows someone selling there PFC for $800 with hand controller.

That’s why I have asked the question.

I have been trying to way up the costs.

Now if I want to change airflow meters I will need to fork out an extra $$.

Ill just have a think about how much power do I want, because if I want big hp in the end I think it's going to be better to get a wolf for the fact that I can get away with not using afm as such and I don't need to buy a boost controller.

is a wolf a straight plug in ecu? or does it need to be wired up (which adds to cost). As one of the advantages of the PFC is that it is a straight plug in ecu with no extra work needed as far as sensors go.

And i also go to DrDrift in Brooklyn, he can remap your stock ecu which eliminates the need for aftermarket computers and the money can be spent on tuning + $ saving.

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2043822
Share on other sites

As far as i am aware they are a straight swap over same as the pfc and also comes with a base map so you too can drive it to a tuner.

I am still weighing up the cost's at the moment.

But it seems to me ( and i could be wrong here) that a lot of tuners are using the pfc. I think thats mainly because the wolf have a lot more features and more load points.

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2045992
Share on other sites

:P I have heard different stories about their tunes........

care to elaborate on these?.... saying that Steve is pretty switched on i dont know about the rest of his crew but the man is quite well creditialed and has a long and proven record in all types of racing catagories.

hey im just throwing it out there as an option for the guy, you dont want someone like Dr drift tunning your car so he can handgrenade yet another car on the dyno :O

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2049285
Share on other sites

care to elaborate on these?....

hey im just throwing it out there as an option for the guy, you dont want someone like Dr drift tunning your car so he can handgrenade yet another car on the dyno :)

and could you elaborate on this?

send me a pm if you like :(

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2049713
Share on other sites

Both ECU's are good, I think you'll be happy either way. PFC is ace though as you simply remove the old ECU and Plug in the new. Very commonly used too. Lots of tuners and easy to remove if you ever need, about 5 mins work.
Wolf is also a direct plug-in. If you remove the afm ( :O ) all you do is plug it back in and block the extra vaccum/boost line going to the ecu.

Alot more tunners know how to tune the Pfc and it is easier to find another w/shop should you decide to change. Start-up is a little quicker (sometimes) than the wolf.

Wolf has PIN security start-up, that can be enabled and disabled at will, air temp compensation, 4 extra AUX outputs, boost controll via you standard solenoide, and other things that the Pfc unfortunately lacks.

Link to comment
https://www.sau.com.au/forums/topic/110683-hi-alll/#findComment-2050812
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...