Jump to content
SAU Community

Recommended Posts

timing belt change its self is usaly around 500.. but then ya gota thing about a few other things that are due to go soon, or have a tendency to break.. water pump, and a few bearings too.. mite be an idea to get them changed wile ya at it. but that will put the cost up a fare bit as i think a new water pump is around $300 on its own, but it would be worth it, because taking the belt off again to change the pump would cost abit in labour

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2047985
Share on other sites

timing belt change its self is usaly around 500.. but then ya gota thing about a few other things that are due to go soon, or have a tendency to break.. water pump, and a few bearings too.. mite be an idea to get them changed wile ya at it. but that will put the cost up a fare bit as i think a new water pump is around $300 on its own, but it would be worth it, because taking the belt off again to change the pump would cost abit in labour

I need to change my belt too, so I'll change these others as well, which bearings do you mean? :(

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2053662
Share on other sites

Hey everyone,

i just wanted to warn anybody who didnt know that if the timing belt dosnt go on properly u get big problems.

i got mine done by a retired mechanic/ famly freind and he has done many timing belts. But he said my R32 GTSt was very difficult. Then my car was rinning very poor so i took to my other mehanic. my other mechanic noticed it wasnt put on right and that because of that my valves were bent and worn down.

ended up costing me $1500.

so i dont want anyone makin same mestake as me so make sure the mecanic has done skylines befor.

anyways just thought id share.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2053938
Share on other sites

how the hell do you find everything so cheap SPX25T????? or are everyones elses qoutes with labour included??

I am only quoting the price of the parts I am changing my timing belt and waterpump this weekend myself with a couple of friends who are mechanics by trade.

I would say other prices are with Labour.

in regards to the waterpump the RB25 waterpump is the same as the RB30 waterpump(so I have been informed will be able to answer that properly on Saturday) so instead of asking for a hard to get Japanese import asking for a local Rb30 part is cheaper

also friends with Autobarn Villawood.

Edited by spx25t
Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2058979
Share on other sites

considering alot of imports are still under 100k's some workshop out there should do a big discount for SAU... think about if everyone from sau went to the one shop for a 100k service.....

ps if some sponsors gonna do this make sure its within the next 2 months coz thats when mines due!!!

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2059848
Share on other sites

A standard timing belt change, should also include changing of the tensioner and idler pullies. Also the two camshaft seals and front crank seal should be changed as well.

(If you buy a timing belt kit, all of the above would be included, not that you can probally get a kit for 25, but any other local engine for eg)

Water pump is always a wise idea as well on RB engines. They can last a very long time, but they can also leak unexpectantly, so if you can't easily change the part in the future yourself or don't have the $ to pay for labour twice, get it all done at once.

If you don't do the seals regularly they harden up and have the potential to leak, but more so they wear a groove into the crank/cam and in the future if it wears enough, a new seal won't stop the leak, you will have to use a speedy sleeve over the shaft.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2061074
Share on other sites

Hey everyone,

i just wanted to warn anybody who didnt know that if the timing belt dosnt go on properly u get big problems.

i got mine done by a retired mechanic/ famly freind and he has done many timing belts. But he said my R32 GTSt was very difficult. Then my car was rinning very poor so i took to my other mehanic. my other mechanic noticed it wasnt put on right and that because of that my valves were bent and worn down.

ended up costing me $1500.

so i dont want anyone makin same mestake as me so make sure the mecanic has done skylines befor.

anyways just thought id share.

How do u know if its been put on properly on not. Mine got recently put on, its running ok but the timing belt is making this wierd noise. If i take it to a tuner, say AVO for example, would they check this out?

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2065713
Share on other sites

Could even be the idler or tensioner not adjusted onto the belt properly, so it's slapping around as it turns. This, or either of those two bearings could be worn and noisy.

I'm doing my timing belt, drivebelts, idler and tensioner in two weeks time... well, my mate will do most of it because he's done it a couple of times before. =-]

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2066551
Share on other sites

Aftermarket seals about $5 each from any spare parts shop. (Same seal as used in RB30, so just ask for VL Comm/R31 Skyline crank or cam seals, same part for all the seals crank and cams on all RB engines)

Get genuine seals if you want about $15 each though. (I use aftermarket on all my RB engines, without drama)

There is a thread with the part no's for the tensioner and idler, tensioner is about $40 and idler around $60 aftermarket from any bearing store/supplier.

Can go genuine as well but they are like $100+each bearing.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2068278
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...