Jump to content
SAU Community

Timing Belt

Winner1

By Winner1,
in General Maintenance

 Share

Recommended Posts

ranicx Veteran

ranicx

Posted
Posted

timing belt change its self is usaly around 500.. but then ya gota thing about a few other things that are due to go soon, or have a tendency to break.. water pump, and a few bearings too.. mite be an idea to get them changed wile ya at it. but that will put the cost up a fare bit as i think a new water pump is around $300 on its own, but it would be worth it, because taking the belt off again to change the pump would cost abit in labour

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2047985
Share on other sites
BOVed Community Regular

BOVed

Posted
Posted
timing belt change its self is usaly around 500.. but then ya gota thing about a few other things that are due to go soon, or have a tendency to break.. water pump, and a few bearings too.. mite be an idea to get them changed wile ya at it. but that will put the cost up a fare bit as i think a new water pump is around $300 on its own, but it would be worth it, because taking the belt off again to change the pump would cost abit in labour

I need to change my belt too, so I'll change these others as well, which bearings do you mean? :(

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2053662
Share on other sites
Fugi Community Regular

Fugi

Posted
Posted

Hey everyone,

i just wanted to warn anybody who didnt know that if the timing belt dosnt go on properly u get big problems.

i got mine done by a retired mechanic/ famly freind and he has done many timing belts. But he said my R32 GTSt was very difficult. Then my car was rinning very poor so i took to my other mehanic. my other mechanic noticed it wasnt put on right and that because of that my valves were bent and worn down.

ended up costing me $1500.

so i dont want anyone makin same mestake as me so make sure the mecanic has done skylines befor.

anyways just thought id share.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2053938
Share on other sites
spx25t Community Regular

spx25t

Posted
Posted (edited)
how the hell do you find everything so cheap SPX25T????? or are everyones elses qoutes with labour included??

I am only quoting the price of the parts I am changing my timing belt and waterpump this weekend myself with a couple of friends who are mechanics by trade.

I would say other prices are with Labour.

in regards to the waterpump the RB25 waterpump is the same as the RB30 waterpump(so I have been informed will be able to answer that properly on Saturday) so instead of asking for a hard to get Japanese import asking for a local Rb30 part is cheaper

also friends with Autobarn Villawood.

Edited by spx25t
Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2058979
Share on other sites
Triskillion Collaborator

Triskillion

Posted
Posted

considering alot of imports are still under 100k's some workshop out there should do a big discount for SAU... think about if everyone from sau went to the one shop for a 100k service.....

ps if some sponsors gonna do this make sure its within the next 2 months coz thats when mines due!!!

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2059848
Share on other sites
RB30-POWER Mentor

RB30-POWER

Posted
Posted

A standard timing belt change, should also include changing of the tensioner and idler pullies. Also the two camshaft seals and front crank seal should be changed as well.

(If you buy a timing belt kit, all of the above would be included, not that you can probally get a kit for 25, but any other local engine for eg)

Water pump is always a wise idea as well on RB engines. They can last a very long time, but they can also leak unexpectantly, so if you can't easily change the part in the future yourself or don't have the $ to pay for labour twice, get it all done at once.

If you don't do the seals regularly they harden up and have the potential to leak, but more so they wear a groove into the crank/cam and in the future if it wears enough, a new seal won't stop the leak, you will have to use a speedy sleeve over the shaft.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2061074
Share on other sites
Taso84 Mentor

Taso84

Posted
Posted
Hey everyone,

i just wanted to warn anybody who didnt know that if the timing belt dosnt go on properly u get big problems.

i got mine done by a retired mechanic/ famly freind and he has done many timing belts. But he said my R32 GTSt was very difficult. Then my car was rinning very poor so i took to my other mehanic. my other mechanic noticed it wasnt put on right and that because of that my valves were bent and worn down.

ended up costing me $1500.

so i dont want anyone makin same mestake as me so make sure the mecanic has done skylines befor.

anyways just thought id share.

How do u know if its been put on properly on not. Mine got recently put on, its running ok but the timing belt is making this wierd noise. If i take it to a tuner, say AVO for example, would they check this out?

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2065713
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Could even be the idler or tensioner not adjusted onto the belt properly, so it's slapping around as it turns. This, or either of those two bearings could be worn and noisy.

I'm doing my timing belt, drivebelts, idler and tensioner in two weeks time... well, my mate will do most of it because he's done it a couple of times before. =-]

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2066551
Share on other sites
RB30-POWER Mentor

RB30-POWER

Posted
Posted

Aftermarket seals about $5 each from any spare parts shop. (Same seal as used in RB30, so just ask for VL Comm/R31 Skyline crank or cam seals, same part for all the seals crank and cams on all RB engines)

Get genuine seals if you want about $15 each though. (I use aftermarket on all my RB engines, without drama)

There is a thread with the part no's for the tensioner and idler, tensioner is about $40 and idler around $60 aftermarket from any bearing store/supplier.

Can go genuine as well but they are like $100+each bearing.

Link to comment
https://www.sau.com.au/forums/topic/110763-timing-belt/#findComment-2068278
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...